Main Relay painintheassery
My engine started just quitting recently.
It does not sputter or stumble, but just stops. This happens under load, and mostly when I am just getting on the gas. I could be leaving a parking spot, or flooring it to overtake someone, and the engine just cuts out. All dash lights go dark when this happens. Cranks with no response. It only fires IF I cycle the key. All this pointed to a main relay issue - the green one under the hood. I pulled the main relay, and it was too hot. On a whim, I bypassed the relay for my aftermarket immobilizer system which feeds the main relay. Things seemed to be OK for a while. The car died a couple times today, once at 15 psi. That was scary. I know Reverant was talking about installing a solid state relay on his car at one point, after having a few main relays fail on him. My theory is, with 4 Toyota COPs and 4 650 cc injectors, there's a whole lot more electrical load (current) on the green relay. I mean, you should have been there to see how hot the relay was. Are any of you guys experiencing similar problems to mine? Would you guys please explain what sort of a solid state relay I can use in its stead? I am thinking if I can get my hands on a powerful relay, I can easily modify/adapt the terminals to make it work. Any thoughts? |
I replaced mine with a standard type 40A(?) relay, and it has been fine ever since.
|
Just ordered a main relay.
It's a waiting game at this point. I'll wait and see what happens, or doesn't. |
Not worth it. They are like $40 new over here from Mazda. I can get 10 generic 40A relays for that kind of money.
|
How did you wire in the solid state relay? I'm getting ready to order one and wasn't sure how you mounted it and wired it.
I've been using jumper wires in place of a main relay for a few years now, but I'm getting tired of going under the hood every time I start or stop the car. |
Well, the main relay did not solve the problem.
The car died under power today on the freeway.. I was carrying enough speed (100+ mph) so I did a quick restart. It does not even want to start unless I cycle the key off and on when this happens. I'll start troubleshooting wire by wire. Argh. |
4 Attachment(s)
Gentlemen, I need your help please...
This problem is not going away. Let me give you guys an itemized list of what I have done so far:
I also conducted a test hoping to pinpoint the problem: (The test yielded no solid results, but an interesting observation) Like I said, I made a heavy jumper out of 3 mm wire and a couple of male terminals to bypass the main relay. As I did that, I also made a light circuit with a long lead, and attached the ends (with male terminals) into the other two terminals of the relay socket. The idea was to monitor the IGN line that triggered the relay. I extended that "test light" into the car, and the light came on as I turned on the key. (meaning, it would trigger the main relay if it was there). If the car died and the light went out, I would know the main relay was no longer triggered, and that would be the cause of the engine dying. In that case, I would look for the problem in that area. So, I started logging, and created the conditions where the car was dying on me. And, just like clockwork, it died halfway into 4th gear under high load. (please see attached log for details) Funny thing is, the "test light" I had extended into the cabin remained lit. That meant the IGN circuit was not at fault. Funnier still, the car would not restart... I had to get out of the car, and remove and reinsert the jumper I was using in the main relay socket, just like cycling the key all the way back to OFF... That made no sense, at all. Once I did that and got back into the car, it started instantly. Joe, Dimitris, Scott, my fellow citizens, soldiers, Romans... Today is the day I need this forum's collective brainpower to solve this thing. And, you know what really hurts me in all this? There is a track event on Sunday which I really wanted to attend. And I can't. It's not just any trackday. They are making Istanbulpark, the genuine, bona fide, real Formula 1 track available for the likes of me for timed events. And I am missing all that for a stoopid electrical problem. (Yeah, I could get up to speed till it cuts out, and coast the rest of the way on the track, I suppose...) |
When this happens, does the speedo gauge (not tacho) also drop to 0?
|
Have you tried pulling apart the ignition switch to look at and clean the contacts?
|
Originally Posted by Reverant
(Post 1012619)
When this happens, does the speedo gauge (not tacho) also drop to 0?
I will recreate the conditions and watch for that this evening. |
Originally Posted by olderguy
(Post 1012629)
Have you tried pulling apart the ignition switch to look at and clean the contacts?
I also went as far as completely bypassing the ignition by installing a jumper across the main relay terminals. I also monitored the IGN circuit by installing a light on the circuit and extending the said light into the cabin. The light never went away when the engine died. |
I had an issue where the contacts in the fuse box that the relay plugged into were loose.
I would have random issues where the car would cut out (no power to the ECU) and then kick back on. Sometimes it wouldn't kick back on until I fiddled around with the relay, which is what made me look at the contacts. I tightened them up to grip the relay harder, haven't had an issue in the two years since. |
Does this only happen since the MS install?
If it happens at night, do the lights stay on? Check the two screws holding the main 80 amp fuse? |
Originally Posted by olderguy
(Post 1012646)
Does this only happen since the MS install?
Originally Posted by olderguy
(Post 1012646)
If it happens at night, do the lights stay on?
Originally Posted by olderguy
(Post 1012646)
Check the two screws holding the main 80 amp fuse?
Even then, why would it require depowering and powering up the circuit fed by the main relay? |
As a proud atheist, I hereby proclaim that
There is a God, and his name is Dimitris. Ask no more, have faith. |
Which "wire" did he wiggle to get results? :)
I'm grasping after any black-magic to get my project started... |
Im having an issue where Im not getting the switched 12v at the relay. I have constant 12v at one lead, but regardless of key position I get nothing on the other side. Works fine when I jumper them. Any ideas?
|
What was the solution here?
I just lost my 4th main relay yesterday since installing the MS, and I just want the car to work again. Tach intermittently dropped to 0 before failure - was not looking at speedo. Also could not connect to DIYPNP. |
Replace the relay with a higher-rating relay.
|
Originally Posted by Reverant
(Post 1200601)
Replace the relay with a higher-rating relay.
|
All times are GMT -4. The time now is 10:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands