|
OEM Cam Gears
2 Attachment(s)
After reading a rather muddled and vague thread on m.net about using OEM cam gears with the exhintake mod, I decided to take some empirical measurements and do some calculations.
On the Mk1 gears, the E slot appears to be as close as to 122.5º, whereas the Mk2 is 123º. Any one else measured them? I used a DTI and rotary table mounted on a mill. My calculations show you can get some adjustment by using different slots and numbers of teeth. |
Wow. That's quite a spreadsheet.
|
Holy Crap! Freaky Roadster, Thank You! I have been looking for something like the info in this spreadsheet for days. You just, well two and a half years ago, made my life a ton easier. Now, to decide whether I would do better powerwise to go with I+25 for 195.6 or E+10 for 200.7 degrees. Does anyone who has tuned an exhintake with cam gears have any input? on the final degree setting of the exhintake cam? I should probably mention that I have a 94
|
| All times are GMT -4. The time now is 04:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands