RacingGreen

I'm in the middle of my rebuild. Just took out the box with the ARP bolts only to find out, that my metric stuff won't work there. So I need to order the right socket but I've honestly no idea what size to order?

The nuts are labled with 7/16 x20, but 7/16 is about 11mm, the nut has a diameter of aproximatly 13mm, so I'm quite confused.

Thanx for your help...Bjoern

bbundy

I think you need a 12 pont 13mm socket if I remember right.

Bob

RacingGreen

my 12pt 13mm socket doesn't seem to fit right, it wobbles arround. so I guess it's some kind of non metric stuff - could it be 1/2inch 12pt?

gooflophaze

bingo. i managed to crack my 13mm 12pt while torquing up the stud, but a 1/2 12pt fit like a glove.

Preluding

iTrader: (10)

All ARP stuff is standard size... my head bolts were 1/2 inch. 12mm will fit but its a little loose and might slip.

old_s13

iTrader: (1)

I just installed mine a few days ago

13mm, but I think people are correct in that they probably use standard as opposed to metric, but 13mm worked just fine.

RacingGreen

thanks a lot guys, 1/2inch socket is ordered...

levnubhin

iTrader: (30)

Ordered?! Are there no auto parts/hardware stores near by?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Preluding

iTrader: (10)

For single sockets like that... I go to Sears, they're about 2-5 bucks each.

baron340

iTrader: (5)

Location location location... My guess is that it's very difficult to impossible to find standard sockets in Germany considering the US is the only country that uses 'standard' sizes.

RacingGreen

You're right, they're available here, as Harley and old English roadsters commonly use this system, but these are no items that wait on the shelf right behind the counter of your parts dealer...but you can order them if you know the size...


btw 1/2" fits like a glove