please help injector size
 

I was going to build a Subaru 2.5rs but decited to sell it. Before I sold it I picked up some 05 legacy gt injectors which I believe are 565cc injectors sould I attempt to tune with this big of an injector setup. On my miata.

Good story.

8/10

Would bang.

meh, I've heard better stories in my lifetime. It was average at best.

Knees too sharp. Denied.

47 is too big

If I need new injectors whats a good alternative.

46

An alternate alternative.

At which point, the original option becomes an alternative option to itself.

Is that you, Corky?

You don't need to understand that.

just shorten the pulsewidths after peak torque

Sheesh. You aren't supposed to actually help him. Just make fun of him instead.

I should have asked if I was going to be more truble than its worth trying to get a good idle with that big of injectors. So you think I can back off enough to get a descent idle?

I'm actually not sure if they're big enough.

You guys are brutal.

I'll help a little, maybe, but I'm an idiot really.

I don't know if Subaru injectors are the same as Miata injectors. But the size wouldn't be an issue if you're running a proper EMS like megasquirt or Hydra.

They're beating on you with perfectly good reason -- you're asking a question whose answer is painfully obvious. A hint: I'm running 1000cc injectors, as are several others, and some are running larger.

They're not. Will require spacers as far as i know. JMuse is using these very injectors i do believe.

I'm an auto Tec, I've never tuned before. So I've been reading to fill in the blanks I don't completely understand and I must have misunderstood what I was reading I thought it said that you could go to big with the injector size. Guess not. thanks for the help . I hope my next question is a little less embarrassing.

You CAN go to big depending on the type of injector. Buy a high quality EV14-style injector though and it really doesn't matter.