Proper Flywheel for NB 1.8
3 Attachment(s)
So, I emptied my garage of its clutches. I have NO idea what cars they have come from over the years though. Can anyone give me some insight into what is 1.6, what is 1.8, that didn't come from a miata. etc. Or just some guidelines to determine how to find a 1.8 NB flywheel out of the mess..
All I've been told about the four, is that it was resurfaced for a 1.6, and didn't fit. Attachment 234627 Attachment 234628 Attachment 234629 |
Both in pic 2 and right on pic 3 look like my 1.8.
|
1.6L vs 1.8L flywheel
You could measure the OD of them.
1.6L should be 200mm 1.8L should be 226mm (if I recall) #3 doesn't look like anything I've ever seen on a Miata. The step height should be 19.86 +/-0.05mm if I recall. |
Thought 1.8l flywheels were 226mm diameter and have PP standoffs, 1.6l was 200mm with no PP standoffs.
Not 100% sure. Close to 95% sure. |
Welllllll I dropped one off at the machine shop. So, fingers crossed? lol
|
1.6 has no standoffs, 1.8 does. I don't know if there is a difference between NA/NB flywheels, but I strongly suspect there is not (if there is, they are interchangeable WRT pressure plates and clutch discs).
|
All times are GMT -4. The time now is 08:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands