Faeflora

iTrader: (2)

Does anyone have any pictures of stock 1.8 pistons? I'm looking for a head-on shot that shows the valve relief cuts.

I've searched all over the interweb and I can't find any pics. Plenty of wisecos/supertechs in this forum but again, I couldn't find stock pics.

Thanks much..

magnamx-5

iTrader: (7)

They all have reliefs on em yeah, even though our motors are non interference i gues its just for insurance.

Faeflora

iTrader: (2)

I'm looking for pics because I'm wondering if the stock pistons have the same little dimple that the supertechs do..

Laur3ns

At your service:


The chip missing from the top-right corner is not OEM.

bayside blue

iTrader: (1)

heres some high quality pics from when i first took my head off...
ill get a pic or them cleaned up for you later

Braineack

iTrader: (62)

these are 1.6L pistons, they look very similar...

richyvrlimited

iTrader: (1)

Surely the engines are non interference because of the relief cuts in the pistons?

Faeflora

iTrader: (2)

OK so I can't tell. Are these stock pistons or supertech pistons?

Braineack

iTrader: (62)

they look like stockers to me. y8s has supertechs in his possession, ask him to compare.

Savington

iTrader: (31)

Super similar, but there's that little dot on the squish area that the Supertechs don't have.

Faeflora

iTrader: (2)

So, the pistons I posted are indeed supertech not stockers?

mistersolo

Here's a picture of a new 01 piston. It has three height levels on the face total. The valve reliefs are larger for the intake side of the piston.

The piston next to it is supertech's try at a 84mm factory compression piston. Note the dot on the top surface towards the right.

Your 03 piston should look like the 01 posted if it is factory. - which is doesn't.

Yours could be lower compression supertechs.

Most of the factory pistons have a small cresent shape cut out of them between the intake valve reliefs and the perimeter of the piston.

John

Faeflora

iTrader: (2)

Thanks John, the 3 height levels looks like the easiest way to tell. I guess this motor does indeed have the supertechs.

Thanks also to everyone else that posted pics!