Questions about running BEGI Multirole FPR as a 1:1 regulator
 

I am upgrading my band-aid setup with MS2 and bigger fuel injectors (550cc). It currently has a BEGI multirole FPR, I was wondering wether it would be possible to run it as a 1:1 regulator.

Thanks.
-Raj

that's what your OEM FPR is for... unless you wanna run more than 300rwhp, you don't need anything but the oem fpr.

My car doesn't have the OEM FPR. The PO removed it when he did the band aid setup. Maybe I should get one and sell the BEGI unit.

The MR unit is overkill, but I wouldn't remove it in favor of a stock FPR.

well if you don't have a fpr, the multi-role can handle the task of a 1:1. You just have the benefit down the road to adjust not only your base pressure, but the amount of rise in boost, so you'll never have to replace those 550cc injectors if you wanna start pushing +300rwhp.

that or sell it, which I doubt you'll get what it's worth, and go back to the factory setup.

Ok. Thanks for the info. I will try to get it working with the multi role.

-Raj