cueball1 |
03-30-2010 07:24 PM |
Quick & stupid wiseco install question.
I can't find instructions regarding the correct orientation of Wiseso Pistons in the block. Nothing in the Wiseco box or on their website. Before the bottom end is all sealed up I want to double check and make sure I guessed right. On the dome of the low comp 84mm pistons the valve cuts are larger on one side than the other. I guessed the larger ones are for the larger intake valves. This is in a 94 1.8L motor.
Did I guess right or is I stoopid? :loser:
|