Rad fans, 1.5 is better than 1?
 

First off I wanna say i'm an electrical noob, but i'm learning!

So at first I was planning on just running one stock rad fan after putting in my upgraded rad. But now I decided to mount my oil cooler behind the rad where the a/c fan usually would sit. But now with my FMIC, rad, and oil cooler located closely together, i'm very tempted to wire in a universal fan infront of my radiator on the passenger side to help with air flow (I also have a vented hood, vented just after the rad).

Anyone have any thoughts on this? I was thinking about splicing the universal fan into the oem fan circuit and running it parallel with the oem fan.

Also I took out my a/c but still have the a/c switch. If I splice the universal fan into the a/c fan plug, would the a/c switch turn on the universal fan?


[IMG]https://www.miataturbo.net/attachmen...ine=142050556020150104_154504 by rajant123, on Flickr[/IMG]

Oil cooler looking from the bottom of the car. There's around half an inch or three quarter clearance from the cooler to the FSB.
[IMG]https://www.miataturbo.net/attachmen...ine=142050551720150104_154504 by rajant123, on Flickr[/IMG]

I was thinking about mounting the fan just above the "Z", which is above my FMIC.
[IMG]https://farm8.staticflickr.com/7486/...56d61d7e_z.jpg20141124_225037 by rajant123, on Flickr[/IMG]

Looks like I suck at posting pics

first pic
https://www.flickr.com/photos/127715...6/16022471750/

second pic
https://www.flickr.com/photos/127715...6/15587423434/

third pic
https://www.flickr.com/photos/127715...6/16209829175/