|
I recommend .017-.020 for the top and .020 for the second for your application. Years ago I did the calcs for a higher power level 1.8 and the required gap was over .020" for the top ring.
|
Originally Posted by LeoNA
(Post 1643834)
I recommend .017-.020 for the top and .020 for the second for your application. Years ago I did the calcs for a higher power level 1.8 and the required gap was over .020" for the top ring.
Damn see this is where um stumped I asked some guy on youtube who goes by Mike the miata king he said some where between .008 - .010 I'm just wondering on how he got low numbers and you got high numbers |
Either he did not know your application was turbo charged or he is a novice.
Originally Posted by Chevyb
(Post 1643836)
Damn see this is where um stumped I asked some guy on youtube who goes by Mike the miata king he said some where between .008 - .010 I'm just wondering on how he got low numbers and you got high numbers
|
Originally Posted by LeoNA
(Post 1643846)
Either he did not know your application was turbo charged or he is a novice.
Thank you for the reply wish me luck I went with .018 |
I think you will be fine at .018". Good luck
|
| All times are GMT -4. The time now is 05:52 AM. |
© 2026 MH Sub I, LLC dba Internet Brands