RX-8 vs RC Engineering Injectors
I have some RC550 Low Impedance Injectors cleaned & flow tested in my garage. I modded my DIYPNP with P&H drivers so they can run low impedance (and high impedance, I'm running Sequential). I'm only at 65-75% DC on the RX-8 Injectors, will I gain anything by swapping in the RC550 injectors? I've heard their flow pattern isn't great, and that I should stick to the high impedance RX-8 Injectors.
Any thoughts? |
Stick with the rx8's.
|
Stick with the Rx8 injectors.
|
All times are GMT -4. The time now is 11:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands