|
Stage 4 Renown BP head
25 Attachment(s)
So we just finished this head for our sponsored Miata Car in FL. This is our Stage 4 "Full Race port." When porting these heads we attack every angle possible. We cut the valves and valve seats here in house and vacuum check every valve for a proper seal. To ensure proper valve train geometry we set and adjust the installed valve tip height. This attention results in maximum performance and reliability. We are working on building an inventory of heads to help expedite the process to help keep your down time to a minimum and your car on the track longer. We will also be offering core exchanges as well. Tell us what you think.
Specs: -Renown 4 angle Valve Job -Renown Full Race Port -Renown Chamber work -Resurface -Supertech dual valve springs -Supertech coated valves -Supertech ti-retainers -Bronze Valve guides Each head we do also receives: -Clean / Hot Tank -Baked and soda Blasted -Visual Evaluation / Inspection -Vacuum tested -Lubricated https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 https://www.miataturbo.net/attachmen...ine=1326941430 |
Sexy.
|
ball park moneys?
|
As that guy in Oceans Eleven said " That is the sexiest thing I have ever seen!"
|
Very nice Brandon.
Was this a 99-00 head? Were you able to get before and after flow numbers? |
Flow numbers and cost?
|
We were unable to flow this one because the customer wanted it right away so the car can drift in this weekends event.
For the port work and the valve job we offer 3 stages. Street port: $600 Mild race port: $900 Full race port: $1200 |
That's a lot of lift!!!
https://www.miataturbo.net/attachmen...ine=1326941430 |
Originally Posted by Renown Performance
(Post 823305)
We were unable to flow this one because the customer wanted it right away so the car can drift in this weekends event.
For the port work and the valve job we offer 3 stages. Street port: $600 Mild race port: $900 Full race port: $1200 |
I bet I could break 300whp with a big-dong port-job on my car at 12psi on the tater. Too bad that I'll never know.
|
What's going on on top of the left hand side valve guide? Looks like a slight crack?
https://www.miataturbo.net/attachmen...ine=1326941430 |
I didn't notice that till we blew it up on the computer. That is just a small burr, the valve guides have not been installed at that point. Once honed for the bronze valve guides that burr would be removed.
|
Head is on the car and will be sliding this weekend!
|
| All times are GMT -4. The time now is 10:01 AM. |
© 2026 MH Sub I, LLC dba Internet Brands