Supermiata damper clearance...?
4 Attachment(s)
About ti press this thing on and only want to do it once.
After installing the trigger wheel the trigger wheel bolts look awfully close to the timing cover (plastic). These pics are with it just sitting there not pressed on yet. Anything I have to shave or do before I proceed? |
Look what I found on 949 site.
Fitment note: Use of trigger wheel will require minor trimming of plastic timing cover on exhaust side of block near oil pan to clear trigger wheel bolts |
Any pics out there of this done?
|
1 Attachment(s)
I do dig that I get to use a 18" wrench on a miata. Kinda funny, the mustang behind it makes 2x the power this thing with the EFR will ever make and I never used a 18" wrench on it.
|
1 Attachment(s)
|
The end of the installer is a 14mm you animal
|
Originally Posted by curly
(Post 1326054)
The end of the installer is a 14mm you animal
|
No, where the vice grips are
|
Originally Posted by curly
(Post 1326054)
The end of the installer is a 14mm you animal
|
Originally Posted by curly
(Post 1326066)
No, where the vice grips are
|
is the install tool really needed or can i use my impact?
|
Originally Posted by Hot_Wheels
(Post 1326621)
is the install tool really needed or can i use my impact?
I pity the next person who rents the installer tool. |
I personally wouldn't use an impact wrench to tighten stuff.
|
All times are GMT -4. The time now is 10:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands