video of my car running poorly...
cold it wont idle at all really, warm it idles around ~1200rpm.
this video is actually the best it's idled since i finished the swap... i have a nasty exhaust leak that i'm not going to fix. i'm going to install the turbo manifold as soon as i get it running right. after i goosed the throttle the idle hung around 2500 rpm for about 20 seconds. then i ran out of room on the memory card on the camera... any ideas why it's idling so bad? |
In for coolant reroute rubber hose melt-down.
|
Originally Posted by hustler
(Post 586037)
In for coolant reroute rubber hose melt-down.
lol thats temporary as well. i couldnt take the route i wanted with all the stock intake piping and airbox in the way. |
What ECU are you using?
If it's a megasquirt you'll find plenty of help with your idle in the Tuning section. |
Stock ecu
|
more information on what you did to it before you put it in?
|
The motor was rebuilt with forged rods. All the sensors and wiring are from my 1.6 that ran fine...
|
I'm going to say a vacuum leak somewhere.
|
like he said maybe even injector o ring.
|
I had a BAD leak at one of the injectors the first time I started the car. I replaced all 4 orings then...
Come to think of it, I believe it idled before I did that.... |
Originally Posted by DrewLGT
(Post 586501)
I had a BAD leak at one of the injectors the first time I started the car. I replaced all 4 orings then...
Come to think of it, I believe it idled before I did that.... |
|
too bad my car doesn't run on lulz |
All times are GMT -4. The time now is 02:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands