Wait or Go for It!!
 

So my engine is rebuilt and sorted for the most part. I have 85 miles on the motor as of now. I've got my wastegate wired open and am dying to throw some boost at it. To soon?... I've got the basics tuned. AFR's look good and safe. No leaks and seems to be running just fine. I've changed the oil twice already and no evidence of anything out of place or shinny bits floating around. Do you all think I should wait to start adding boost even if just wastegate pressure? Your opinions are appreciated.

https://cimg4.ibsrv.net/gimg/www.mia...e79b2c6079.jpg

More info is needed, my limited experience says sort out the issues before compounding them with boost. I'm sure someone will chime in with engine break in info.

By sorted I mean just little things to take care of nothing major. I’ve already followed the flyin miata break in procedures other than driving it a couple hundred miles. Since this cars just a toy for me it could take a while to do that.

There is no problem with going ahead and putting the beans to it. In fact, you probably need to go ahead and do that.

That’s what I’m wanting to hear!!... 😎
Its tough going from boost to no boost even if it was with a tired motor.

I would just run a line straight to the wastegate and run it at WG pressure.

You said nothing shiny. Did you shine a flashlight into the oil from the first change? It is normal to have some super fine glitter from the rings breaking in, you should have seen the oil that came out of my new John Dere after 1 hour of running!

shorten that return hose...

Shortened. Thank you!!
https://cimg7.ibsrv.net/gimg/www.mia...82eecfe45b.jpg

My car ran on wastegate pressure from day 1 of the fresh engine.

Just do it.

Make sure you have overboost turned on.

Let her have it. Run wastegate pressure and continue to tune. If it wont hold wastegate pressure at this point, it never will.

I ran 12 lbs. from mile 1.

Break in your motor the way you're going to run it.

This.

Thanks guys. Ive got the wastegate hooked up and Im gonna take it out tonight and let her have it. Will prob stay at wastegate pressure for a couple pulls than turn it up and see what happens. All new and all forged so should be able to handle 20 psi!!!! Lol...... 🤑