what injectors are these?
1 Attachment(s)
I read online they might be supra 440cc or Mazda 360cc. How do you tell without a flow test? They are in a 1.6. https://www.miataturbo.net/attachmen...ine=1401322159
|
There should be a number stamped on the plastic on the side of the injector...something like 195500-3350 or something like that.
|
Originally Posted by thirdgen
(Post 1135081)
There should be a number stamped on the plastic on the side of the injector...something like 195500-3350 or something like that.
|
Those look black to me. I'd assume they're out of the 323 GTX and are 360cc, based of this site:
Fuel Injectors - Miata Turbo FAQ I'd also move on to a better injector. Recently upgraded to RX8 injectors on my car and NB2 injectors on a friend's N/A NA. Impressed with the results, and happy I'm done with those giant boxes called injectors. |
Originally Posted by curly
(Post 1135161)
Those look black to me. I'd assume they're out of the 323 GTX and are 360cc, based of this site:
Fuel Injectors - Miata Turbo FAQ I'd also move on to a better injector. Recently upgraded to RX8 injectors on my car and NB2 injectors on a friend's N/A NA. Impressed with the results, and happy I'm done with those giant boxes called injectors. |
He said to move on to a better injector. He did not specifically say to move on to a bigger injector. Just a better one. Size is up to you.
|
With the price of a set of RX-8 yellows being in the sub-$100.00 range, I can see absolutely no justification for not finding a set of them over any other "budget" injectors.
|
Originally Posted by dieselmiata
(Post 1135170)
With the price of a set of RX-8 yellows being in the sub-$100.00 range, I can see absolutely no justification for not finding a set of them over any other "budget" injectors.
|
Not sure. I don't think anyone has asked that question before.
|
Originally Posted by dieselmiata
(Post 1135170)
With the price of a set of RX-8 yellows being in the sub-$100.00 range, I can see absolutely no justification for not finding a set of them over any other "budget" injectors.
|
Brand new ones are $160. Just do it.
|
These are the ones you guys are talking about right?
450 cc Injectors Mazda Miata Where are you finding them so cheap? I've been looking for cheap injectors for a couple months and all I can find is people wanting $150 for some rusted up 1988 N/A RX7 injectors. |
Originally Posted by pdexta
(Post 1135190)
These are the ones you guys are talking about right?
450 cc Injectors Mazda Miata Where are you finding them so cheap? I've been looking for cheap injectors for a couple months and all I can find is people wanting $150 for some rusted up 1988 N/A RX7 injectors. They can be purchased on ebay sans Begi Tax. Example: Here's a set of 550s i've been watching: http://cgi.ebay.com/ws/eBayISAPI.dll...m=380915400089 The yellows can be found for the same if not cheaper. I saw a set go a few weeks back for $152. These are reman, but the new yellows seem to hover in the $160-$180 range. |
Log on to the RX-7/8 forums and wait. I picked mine up for $100.00 and they had just been flow tested.
|
Originally Posted by concealer404
(Post 1135194)
They can be purchased on ebay sans Begi Tax.
Example: Here's a set of 550s i've been watching: Mazda 2004 09 RX 8 1 3L Set of 4 550cc Direct Fit Fuel Injectors | eBay The yellows can be found for the same if not cheaper. I saw a set go a few weeks back for $152. These are reman, but the new yellows seem to hover in the $160-$180 range. |
Originally Posted by 1.6turbokid
(Post 1135213)
Those flow tests just look too good to be true.
Be as it may, i can 100% guarantee that they test better than whatever old crap EV1s you were talking about getting earlier. |
The black ones above have a square connector, so they are not from the 323, which has the proper connector to be PnP. These may be low impedance, so beware.
|
Originally Posted by concealer404
(Post 1135216)
Be as it may, i can 100% guarantee that they test better than whatever old crap EV1s you were talking about getting earlier.
|
Originally Posted by 1.6turbokid
(Post 1135219)
I might end up getting those. I have a guy who wants to sell me deutsworks 440cc for $150. should i get the 550cc instead off ebay? I am trying to make around 250whp
Your question is impossible to answer as posed. It's almost like you're incapable of doing any sort of research yourself. |
Originally Posted by Reverant
(Post 1135217)
The black ones above have a square connector, so they are not from the 323, which has the proper connector to be PnP. These may be low impedance, so beware.
|
All times are GMT -4. The time now is 01:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands