Miata Turbo Forum - Boost cars, acquire cats.
Page 2 of 2
1
2
Show 60 post(s) from this thread on one page

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Engine Performance (https://www.miataturbo.net/engine-performance-56/)
-   -   Where to buy new harness connectors? (https://www.miataturbo.net/engine-performance-56/where-buy-new-harness-connectors-65767/)

Leafy 01-09-2013 11:46 AM
https://www.miataturbo.net/general-m...ch-hunt-70034/

Nope, haven't found the VVT connector yet. And I keep striking out on the cam connector, its really pissing off the corsia guy though, he swears he's seen it before but cant find it.

hustler 01-09-2013 11:47 AM
I need the VVT solenoid plug and the VVT coil plugs. This shit is mad ghey.

Reverant 01-09-2013 12:05 PM
The VVT plug is also on the RX-7 FD harness as well.

Leafy 01-09-2013 12:09 PM
Originally Posted by Reverant (Post 966604)
The VVT plug is also on the RX-7 FD harness as well.
What is it used for on the rx7? What would be awesome would be if any of these plugs were on DSM harnesses because those guys have their shit together and have every single harness connector figured out and where to buy them.

Miater 01-09-2013 04:47 PM
Originally Posted by Leafy (Post 966343)
And I bet that 4P090WP-DL-M-SPA-S is not made Just like the CAS connector which is 4P090WP-DL-M, and not made. Wait. Those are the same part numbers. So. The CAS and the coil packs use the same connector. Cool.

I also have 4 of the female versions of those connectors that I ordered thinking they were the same as the toyota cop harness. I'll also confirm that the 94-95 coils use the same connector, because I just pulled the two together.
Did you ever confirm the coil pack plugs?

Leafy 01-09-2013 04:49 PM
2 Attachment(s)
Originally Posted by Miater (Post 966739)
Did you ever confirm the coil pack plugs?
Read below

Originally Posted by Leafy (Post 966343)
And I bet that 4P090WP-DL-M-SPA-S is not made Just like the CAS connector which is 4P090WP-DL-M, and not made. Wait. Those are the same part numbers. So. The CAS and the coil packs use the same connector. Cool.

I also have 4 of the female versions of those connectors that I ordered thinking they were the same as the toyota cop harness. I'll also confirm that the 94-95 coils use the same connector, because I just pulled the two together.


http://qkme.me/3si71z

Miater 01-09-2013 05:24 PM
I had the tense wrong.

I read that you were, goin to confirm. I now see that the statment was the confirmation. Gotcha.

Leafy 01-10-2013 10:51 PM
Originally Posted by hustler (Post 966599)
I need the VVT solenoid plug and the VVT coil plugs. This shit is mad ghey.
Hussy, you wrub me wong time?

So, 01+ COP harness connector = 3P090WP-DL-F

So yes, if you were wondering, you can plug a 01+ cop directly into an NB crank sensor. :party:

AbeFM 01-21-2013 12:35 PM
Originally Posted by hustler (Post 966592)
has anyone confirmed the VVT solenoid connector number? If we can figure some of this out, I'll put all the part numbers on the table I'm making for common Miata part numbers by year.
So like, this is some google-docs thing that we can all check out in real time to get the very, very latest? :-)

AbeFM 01-21-2013 01:57 PM
https://docs.google.com/spreadsheet/...1lCaHRsLU8yX2c

Just the barest outlines of a spreadsheet. Anyone can view this - and I will allow people I deem qualified/responsible (i.e. most of you folks) to make edits, just ask me and set me up with your email address you use with google products.

rharris19 01-25-2013 11:03 AM
We would need the small 22-18ga versions of the 4P090WP-DL-F-SPA Coil Pack and CAS plugs right?

AbeFM 01-25-2013 01:11 PM
I think most of the conversation has moved to this thread:
Connector Witch Hunt - Miata Turbo Forum - Turbo Kitten is watching you test compression.


All times are GMT -4. The time now is 05:24 PM.
Page 2 of 2
1
2
Show 60 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands