Wiseco Piston compatibility with VVT
Hi !
I'm re-building up a bit of frankenstein Turbo motor, and will be looking to put in some .040 over (84mm) Wiseco pistions. the Block is from a 94, and the head is a VVT head. The Wiseco man wasn't able to tell me if my valve pockets would be OK or not with this setup, so I thought I'd see if anybody has experience with this sort of setup... Thanks ! |
If it means anything to you, I'm using Supertech pistons with +1mm oversized valves in a 94 block and VVT head.
That being said, browsing through vendor listings, it looks like pistons for 1.8L are compatible for 94-05 See fab9tuning.com for instance |
Same motor. Roll on.
|
Wiseco Piston compatibility with VVT
With stock VVT cam you will most probably have a lot of clearance even at full advance.
My setup however needs to be blocked at 42 degrees advance or the valves will hit, but why would you by that stupid ;). Measuring/testing is knowing... |
Originally Posted by NiklasFalk
(Post 1239303)
With stock VVT cam you will most probably have a lot of clearance even at full advance.
My setup however needs to be blocked at 42 degrees advance or the valves will hit, but why would you by that stupid ;). Measuring/testing is knowing... |
Wiseco Piston compatibility with VVT
Originally Posted by TheV's
(Post 1239364)
Cool, thanks - so do you have a modified VVT cam with higher lift or something ?
I don't remember the min/max lift values at TDC, that's what a good builder is for :D |
All times are GMT -4. The time now is 10:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands