The custom fabrication thread! (Post pics of stuff you have made)
#505
I forgot to take pictures, but last two nights I made a new billet endcap and welded it to a new perf core section for the aluminum exhaust setup. The previous one failed the rivets after like 6 races and then finishing the race broke the perf core into multiple pieces and fucked up both end caps. This one wont fail, its bolted and billet.
And while welding it I must have shorted out the miller mask at school. I somehow managed to get zapped in my elbow and then the mask would always go full dark when I started the arc even though it was set to 9 glass. I had to reset the mask to get it back to normal. It was weird.
And while welding it I must have shorted out the miller mask at school. I somehow managed to get zapped in my elbow and then the mask would always go full dark when I started the arc even though it was set to 9 glass. I had to reset the mask to get it back to normal. It was weird.
#507
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
You dont need unreal tools and unlimited resources to make a good weld.
Jeff, yours looks fine and will have no problems holding.
Though Im no pro, I made good welds in my shop at home, and I dont have a ton of tools and the ones I do have arent anything more than any other consumer. Make due with what you have. Spend the money getting educated and you will get way better than others who dont.
I have said it before -maybe not here- but there is nothing like an old boy welder yelling in your ear while your welding away trying to help you out. Take a class.
Jeff, yours looks fine and will have no problems holding.
Though Im no pro, I made good welds in my shop at home, and I dont have a ton of tools and the ones I do have arent anything more than any other consumer. Make due with what you have. Spend the money getting educated and you will get way better than others who dont.
I have said it before -maybe not here- but there is nothing like an old boy welder yelling in your ear while your welding away trying to help you out. Take a class.
#512
Lol. How much boost does it make wide open? I know my IWGA runs out of throw before the WG is all the way open which is why my car creeps to 10 psi. Based on what I've seen if you can get a 6psi waste gate that opens more than mine and run 8psi it should be fine on the stock bottom end with the the 6758, and probably the 6258.
#516
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,947
Total Cats: 1,002
Jeff: props for owning a Merkur. That takes courage. Miss mine some days.
To the rest if you: if you look at boost_addict's latest photos there and don't hit the props button, you are failing our community and you should go join m.net.
To the rest if you: if you look at boost_addict's latest photos there and don't hit the props button, you are failing our community and you should go join m.net.
#520
Almost finished up. MS2 is in and running nicely and most everything else is buttoned up. Just need to swap out shady *** heater hose and replace a questionable hose from the fill bottle to the pipe that runs from the t-stat housing to the manifold. Then the carnage begins!
Edit: Seriously, the stock cooling system on these cars looks like it was designed by Hyper. No ******* joke.