F/S 1.6L Greddy Turbo Kit modified to hell. + other turbo related stuff.
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 257
Total Cats: 0
F/S 1.6L Greddy Turbo Kit modified to hell. + other turbo related stuff.
so despite barely finishing up my miata i have decided to sell it, with that i am returning the car to stock. so up for grabs is my greddy turbo kit with 5k miles on it since i had it.
it includes:
greddy manifold, and turbo. all bolts redrilled for 3/8" [B][B]
turbo tony modified downpipe 2.5" to 3" all the way back with a 3" high flow cat SOLD
now include in sale is stock greddy dp.
305cc supra injectors
reclocked turbo with bracket.
turboxs dual stage boost controller
huge *** ebay-cooler /w piping and hks ssqv bov
bowser heat shield.
looking at $1300 shipped. no exhaust and stock greddy dp.
$1000 shipped with no intercooler.
i figured i would post all this here before anywhere else so you guys can get first dibs. ill be posting in clubroadster later tonight with a **** ton of other stuff of my car.
im also selling
apex'i water, oil temp gauges, boost gauge, apexi controller box and all the senders for the gauges. 60mm black faced with blue backlight the stands are dble sided taped to my gauge hood. so you might need one new one. or i could give you my hood in exchange for yours with the gauges already mounted. $400 shipped
55mm koyo rad.... used for 500miles. $300 shipped.
bee*r rev limiter $200 shipped
apexi turbo timer harness cut for miata application$50 shipped
1.8L torsen differential with 3.969 ring and pinion.
includes pumpkin, housing, half shafts, drive shaft, and brand new mmr diff mounts. $900 + shipping = (
left exit exhaust
more exhaust photos
how you might have to cut the tow hook to get it to fit...
gauges
huge front mount
oil fitting you'll get with purchase
koyo rad installed
torsen diff with mmr mounts
old mounts.
how my car looks now with the front mount installed.
it includes:
greddy manifold, and turbo. all bolts redrilled for 3/8" [B][B]
turbo tony modified downpipe 2.5" to 3" all the way back with a 3" high flow cat SOLD
now include in sale is stock greddy dp.
305cc supra injectors
reclocked turbo with bracket.
turboxs dual stage boost controller
huge *** ebay-cooler /w piping and hks ssqv bov
bowser heat shield.
looking at $1300 shipped. no exhaust and stock greddy dp.
$1000 shipped with no intercooler.
i figured i would post all this here before anywhere else so you guys can get first dibs. ill be posting in clubroadster later tonight with a **** ton of other stuff of my car.
im also selling
apex'i water, oil temp gauges, boost gauge, apexi controller box and all the senders for the gauges. 60mm black faced with blue backlight the stands are dble sided taped to my gauge hood. so you might need one new one. or i could give you my hood in exchange for yours with the gauges already mounted. $400 shipped
55mm koyo rad.... used for 500miles. $300 shipped.
bee*r rev limiter $200 shipped
apexi turbo timer harness cut for miata application$50 shipped
1.8L torsen differential with 3.969 ring and pinion.
includes pumpkin, housing, half shafts, drive shaft, and brand new mmr diff mounts. $900 + shipping = (
left exit exhaust
more exhaust photos
how you might have to cut the tow hook to get it to fit...
gauges
huge front mount
oil fitting you'll get with purchase
koyo rad installed
torsen diff with mmr mounts
old mounts.
how my car looks now with the front mount installed.
Last edited by shinobix; Nov 15, 2007 at 01:23 AM.
Reply
0
0
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 257
Total Cats: 0
Reply
0
0
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 257
Total Cats: 0
i should clarify. my welder mangled the downpipe. not in a bad way. he just cut before the original flange in order to weld on my cat and 3" exhaust. so if i did sell the dp alone, i don't think it will bolt up to any other exhaust system.
Scott
Scott
Reply
0
0
Reply
0
0
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 257
Total Cats: 0
Reply
0
0
