Group buy on the new ES HyperFlex Master Kit for 90-97 Miata's
#1
Elite Member
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
Group buy on the new ES HyperFlex Master Kit for 90-97 Miata's
Group buy on the new ES HyperFlex Master Kit for 90-97 Miatas
- Price - $209 shipped within the Continental US
- Minimum participation level - 10 people
- End date - March 2, midnight
- Payment method - To be determined
- Ship date - 2 to 3 weeks after 10 orders are placed
- Vendor - http://www.lightningmotorsports.com
- GB Coordinator - Chriscar sr20de@optonline.net
About me - Since I've only been here about 2 months, not all of you know who I am. I've been in the Nissan B13 camp for a long time, and recently bought a Miata. I've been a moderator at SR20forum.com for longer than I can even remember, and am currently one of two administrators on the site. I have run multiple group buys on SR20Forum, including ones with Hyperco where I was instrumental in getting them to custom manufacture high rate conventional type springs for the Nissan B13 & B14 chassis, resulting in sales in excess of $100,000 dollars over the course of 5 years and multiple group buys, and every single sale went through me. My eBay rating is 100%, and am one of the highest rated sellers at SR20forum. I like long walks on the beach......
Here's the thread that kicked this group deal off.
1990-97 HYPER-FLEX SYSTEM Complete Master Bushing Set #11.18102
CONTENTS
- front control arm bushings
- front sway bar bushings
- rear control arm bushings
- rear sway bar bushings
- rear differential bushing set
Front control arm bushing set: 11.3105
- 4 2165 Upper control arm
- 2 2690 Lower control arm Rear pos/front
- 2 2691 Lower control arm Rear pos/rear
- 2 2692 Lower control arm Front Pos/ front
- 2 2693 Lower control arm Front Pos/ rear
- 2 15.10.549.39 (.875”x.480”x 2.750”)
- 2 15.10.472.39 (.875”x.480”x 2.355”)
- 4 15.10.575.39 (.875”x.480”x 2.250”)
- 1 17491 Instruction sheet
- 2 5042 Bushings
- 4 8062 Bushings
- 4 15.10.202.39 (.625”x.393”x.940”)
- 2 15.03.01.39 (1.250”x.385”x.110”)
- 2 15.802.39 Mini Bracket
- 1 17086 Instruction sheet
- 8 2694 Upper
- 4 2695 Lower outer pos/ inside
- 8 2696 Lower inner pos
- 4 2697 Hub to upper control arm
- 4 2699 Lower outer pos/ outside
- 4 15.10.541.39 (.875”x.562”x2.270”)RLCA outer
- 4 15.10.549.39 (.875”x.406”x2.750”)RLCA inner
- 4 15.10.576.39 (.875”x.406”x2.250”)RUCA
- 2 15.10.577.39 (.750”x.406”x2.250”)HUB
- 2 15.03.05.39 (2.000”x .500”x .120”)WASHER
- 2 15.03.12.39 (2.000”x .500”x .120”)WASHER
- 1 17437 Instruction Sheet
- 2 5099 Rear ½” bushing
- 4 8062 End link bushing
- 2 15.03.01.39 (1.250”x.385”x.110”)
- 1 17086 Instruction sheet
- 2 2698 Differential case bushings
- 2 4247 Cross member washer bushings
- 2 15.1.329.39 (0.875”x0.573”x2.500”)
- 1 17493 Instruction sheet
- 1 9.11113 2oz. Red Grease Tub
BUYER'S LIST
- deliverator
- UrbanSoot
- whaaamx5
- fourwhls
- FireTora
- jayc72 (shipping to Canada t5z-0a6)
- soflarick
- MazDilla
QUESTIONS
- Shipping to Canada t5z-0a6
- Black and red?
- 98 > Compatibility
- Shipping discount for multiple sets to one address.
Last edited by chriscar; 02-15-2008 at 08:31 AM.
#9
Elite Member
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
I don't know, but they don't list any of the components as being compatible with the 98 and up.
See here - http://www.energysuspensionparts.com....asp?cat=10239
C
See here - http://www.energysuspensionparts.com....asp?cat=10239
C
#12
Elite Member
Thread Starter
iTrader: (24)
Join Date: Dec 2007
Location: Carrollton TX
Posts: 1,709
Total Cats: 15
Yeah, I thought of that, and looked to see if it would be cheaper to buy the F&R control arm kits & diff kit, but it still comes out to more money than the group buy price for the complete kit. Heck, sell the F&R sway bar bushings for $30 or so to someone still running stock bars.
What sway bar bushings are you using now?
C
What sway bar bushings are you using now?
C
#13
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
Yeah, I thought of that, and looked to see if it would be cheaper to buy the F&R control arm kits & diff kit, but it still comes out to more money than the group buy price for the complete kit. Heck, sell the F&R sway bar bushings for $30 or so to someone still running stock bars.
What sway bar bushings are you using now?
C
What sway bar bushings are you using now?
C
but since I have an 01, I'll wait to see how much is compatible.
#17
From Flyin Miata's website on their Super Pro bushings
Hmm, so maybe these will too?
High quality performance urethane bushing set from Australia. Different durometers are used for different bushings, just like Mazda did. This gives the same handling balance as stock but with more precision. Complete kit includes for all control arms, front and rear. Sway bar bushings not included. These bushings will affect ride quality - the suspension will move more freely, but sharp impacts will be transmitted more strongly than before.
Fits all Miatas.
Fits all Miatas.
#20
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Good job Chris.
Would you mind contacting Lightning to see if they'd offer a shipping discount on 3 sets shipped to the same address? Thx--I figure myself, Ben, and Rob could save a few bucks if they also want in...
Would you mind contacting Lightning to see if they'd offer a shipping discount on 3 sets shipped to the same address? Thx--I figure myself, Ben, and Rob could save a few bucks if they also want in...