FS: 1.6L poor man's turbo!
Thread Starter
Elite Member
iTrader: (24)
Joined: Jun 2007
Posts: 4,667
Total Cats: 18
From: Woodland Hills, CA
so im going a different route and here are some parts that i need to get rid of to get roll cage and some more track stuff...
all stuff is BRAND NEW.
1.6L cast iron ebay manifold ($140)
chinacharger t3/t4 w/ v-band ($180)
oil return fitting ($20)
oil feed line with oil filter sandwich adapter and turbo fitting ($60)
lc-1 wideband w/ out sensor or gauge ($100)
intercooler piping ($80)
no-name fpr ($50)
no-name bov ($40)
msd box ($100)
what you will absolutely need to run it:
down pipe (any muffler shop for about $100 will do just fine)
o2 clamp ($20 used, $50 new)
oil return line (any auto parts store)
turbo specs:
Compressor Specs :
2.150 Inducer
2.207" or 56.06mm inducer
2.567" or 65.20mm Major
Compressor .50 A.R.
Compressor 57 Trim
M24 / T4 Compressor Housing
Turbine Specs :
T3 Type Turbine
2" Exducer
2.756" or 70.00mm Major
2.131" or 54.14mm Minor
Exhaust Outlet Flange with V-Band design
this setup will get you started. $650 shipped for everything.
all stuff is BRAND NEW.
1.6L cast iron ebay manifold ($140)
chinacharger t3/t4 w/ v-band ($180)
oil return fitting ($20)
oil feed line with oil filter sandwich adapter and turbo fitting ($60)
lc-1 wideband w/ out sensor or gauge ($100)
intercooler piping ($80)
no-name fpr ($50)
no-name bov ($40)
msd box ($100)
what you will absolutely need to run it:
down pipe (any muffler shop for about $100 will do just fine)
o2 clamp ($20 used, $50 new)
oil return line (any auto parts store)
turbo specs:
Compressor Specs :
2.150 Inducer
2.207" or 56.06mm inducer
2.567" or 65.20mm Major
Compressor .50 A.R.
Compressor 57 Trim
M24 / T4 Compressor Housing
Turbine Specs :
T3 Type Turbine
2" Exducer
2.756" or 70.00mm Major
2.131" or 54.14mm Minor
Exhaust Outlet Flange with V-Band design
this setup will get you started. $650 shipped for everything.
Last edited by UrbanSoot; Sep 12, 2008 at 01:23 PM.
LOL wasnt expecting that.
Can you post some pictures of everything.
Or email em to me.
98ninja250R@gmail.com
Can you post some pictures of everything.
Or email em to me.
98ninja250R@gmail.com
I'll be buying them next week granted my stuff for my camaro sells, the turbo has an integral wastegate like on the ebay link?
If someone wants them between now and then i understand but otherwise should be monday or tuesday
If someone wants them between now and then i understand but otherwise should be monday or tuesday
Thread
Thread Starter
Forum
Replies
Last Post






just kidding itl be a week or so before i'll be buying anything anyways

