90-93 COPs PNP Harness - $100 shipped
#1
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: San Diego, Ca
Posts: 373
Total Cats: 0
90-93 COPs PNP Harness - $100 shipped
I built this harness for my 93 Miata COPs conversion, but I'm now replacing my 93 with a 96 Miata and converting my 93 completely back to stock so I don't need it. I tested it on my 93 (ran good), but that's about it. Made with Toyota OEM pigtails and a gutted Miata 1.6 ignitor so it is completely plug and play and all you need is 4 Toyota COPs (I need my 4 for my 96 so they aren't included). All joints soldered and heat shrinked (extra layer of electrical tape around heat shrink in the ignitor). No holddown bracket included as I never got around to making one. What you see in the pics, you get. Now $80 Shipped!
Last edited by clay; 12-14-2009 at 08:49 PM.
#4
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: San Diego, Ca
Posts: 373
Total Cats: 0
I thought you had already found some online. Sorry about that. I actually have 4 more pigtails (2 white and 2 black for some reason) I was going to use to make up a spare PNP harness for my 96. If you want them, I could do $20 picked up.
#6
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: San Diego, Ca
Posts: 373
Total Cats: 0
Yeah, those are the coils I use (even the same seller I got them from), but you wouldn't need the pigtails that come with them as they are included in the harness. You could probably contact that seller and get a better deal on 4 coils with no pigtails since he seems to have a ton of them.
More info in these threads:
https://www.miataturbo.net/forum/t12704/
https://www.miataturbo.net/forum/t18937/
Only other thing you would need is some sort of bracket to hold down the coils so they don't vibrate out of the hole over time. I think at one time somebody was selling premade brackets that would hold the COPs down, but I'm not sure. I made this one for my 96 for about $8 total in parts from Lowes:
More info in these threads:
https://www.miataturbo.net/forum/t12704/
https://www.miataturbo.net/forum/t18937/
Only other thing you would need is some sort of bracket to hold down the coils so they don't vibrate out of the hole over time. I think at one time somebody was selling premade brackets that would hold the COPs down, but I'm not sure. I made this one for my 96 for about $8 total in parts from Lowes:
#8
Junior Member
Thread Starter
iTrader: (6)
Join Date: Jan 2006
Location: San Diego, Ca
Posts: 373
Total Cats: 0
Cool, if you are local you are welcome to come pick the harness up and save the $5shipping ($75). I live just off Racetrack Rd. Of course, I can ship it if you need me to, just PM me what you want to do and I will reply with my address or my paypal depending on which way you want to do it.
I did just buy a engine and hood, but passed on the bumper from a guy in Tampa. Did you get some parts from him as well?
I did just buy a engine and hood, but passed on the bumper from a guy in Tampa. Did you get some parts from him as well?
#9
I might just get you to ship it to me because I live alittle outside jax. I was thinking you were someone else. I sold and painted a hood and bumper for a guy with a car like yours earlier in the year and thought you might be him. I'll send ya a PM and we can get the ball rolling
Thread
Thread Starter
Forum
Replies
Last Post