SOLD


Hey there all...

Doing some early spring cleaning and have the following things for sale:

This is what is left of my CX Racing kit that I was going to use but ended up not going this route. The unwrapped pipes have some scratches on them from fab and whatnot but are otherwise fine for installation. The wrapped pieces are virgin: It's all 2.5" black powder coated aluminum...

Straight Aluminum Pipe x2
45 Degree Aluminum Pipe x2
90 Degree Aluminum Pipe x2
J Aluminum Pipe x2

5 Silicone couplers:
2 pieces of 2.5 : 2.25
2 pieces of 2.5 : 2.5
1 piece of 2.5 : 2

Of course the FM Shiny intercooler. Bolted onto my 99 no problem and was used for about 2 weeks. Great condition with only a couple of lightly bent fins...

Pictures say it all. Please let me know if you are interested. Shipping is via UPS ground from 20166 zip code.

Asking $150 for it all, plus actual shipping costs.

Cheers,
Prospero[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH][/ATTACH]

 

I use those exact U shaped pipes from my intercooler to the other side of my radiator. Good luck with the sale!

 

Yeah the quality is not bad on them... would have used them for my setup but BEGi had a deal on the intercooler # 1 that I could not pass on.

Cheers!
Prospero

 

would you sell just the piping and silicon? I already have an intercooler. how much? thanks.

 

is this a full intercooler kit? pm me please

 

I would like to do this all as one "kit" but can consider breaking things up if you make a reasonable offier. Just PM me and we can chat about what you have in mind.

Thanks and Prospero...

 

This kit is not a complete kit in that it will need to be cut and fab'd to fit your car. I bought the raw materials but ran out of time to do the project on my own. A little time and some extra pieces here and there and you could make this kit go onto your ride... but it surely is not plug and play. The IC will bolt right on but the pipes are all gonna need some bending / cutting / lovin...

Hope this helps.

Cheers,
Prospero

 

I'm gonna holdoff for now...decided to get reducing 90 degree couplers instead. thanks

 

All of them have a rolled lip?

 

All pieces have a rolled lip except for the 'J" pipes...

Cheers,
Prospero

 

I'm interested in how this fits/looks in a 99. Do you have any installed pics? It's the only missing piece for me. I have a full IC pipe kit, mild steel so I can weld up what I want, so wouldn't really be interested in the pipes, just the IC. I'd be interested if you would split.

 

___sold____