GReddy turbo kit
Thread Starter
Newb
iTrader: (2)
Joined: Oct 2004
Posts: 23
Total Cats: 0
From: Ft. Walton Beach, Fl
Basic GReddy turbo kit plus a few extras. 60K miles, no shaft play, never raced
- stock manifold and down pipe
- oil feed line with adapter
- SS heat shield
- Vortech FPR with stock disk
- Bipes ACU
- Starion intercooler and IC pipes
- A-pillar gauge pod with VDO temp and boost gauges. (minor corrosion on chrome trim ring on the gauges
- K&N filter & adapter
- Bosch BOV
- 1.8L injectors (bought these used but never installed)
- All threads good on manifold and turbo, none of the bolts broke and all threads were chased with a tap
All rubber hoses were cut off so these will have to be replaced
Recommend new hardware
pics here:
Turbo removed album | Doink | Fotki.com
$575 plus shipping
A-pillar gauge pod is still in the car. I'm waiting on new heater hoses so I can remove the temp sensor.
- stock manifold and down pipe
- oil feed line with adapter
- SS heat shield
- Vortech FPR with stock disk
- Bipes ACU
- Starion intercooler and IC pipes
- A-pillar gauge pod with VDO temp and boost gauges. (minor corrosion on chrome trim ring on the gauges
- K&N filter & adapter
- Bosch BOV
- 1.8L injectors (bought these used but never installed)
- All threads good on manifold and turbo, none of the bolts broke and all threads were chased with a tap
All rubber hoses were cut off so these will have to be replaced
Recommend new hardware
pics here:
Turbo removed album | Doink | Fotki.com
$575 plus shipping
A-pillar gauge pod is still in the car. I'm waiting on new heater hoses so I can remove the temp sensor.
I have dibs sorry guys waiting for him to pm me... F it heres my Email paulfraser123@aim.com contact me got the cash





