[NA] No Power, messed up my wiring!?
 

Hello guys, I hope someone can help me with my Problem.

So I was removing my AC Unit and Blower Motor, because Racecar and I decided it would be a good Idea to strip a bit of the Dash wiring (yes, I am stupid, no, I will not do it again https://forum.miata.net/vb/images/smilies/redface.gif https://forum.miata.net/vb/images/smilies/ononono.gif )

Basically how I went about it is that I looked through the wiring Diagrams that I had and snipped off the wiring for said blower Motor and AC.

After that I did a test and replugged just the things that I thought would be necessary and everything seemed well, so I removed all the wiring that was not connected during this test as well.

When I went to put it all back behind the dash and into the car I am now left with what seems like almost no power at all.

My Headlights and Parking lights still work but that seems to be it. The Dash shows high-beams when they are on but nothing else is working, no lights nothing. When turning the key and trying to start it nothing happens as well.

After reading a bit about it I thought my Main 80A Fuse snapped, so removed that today but I am still left with the same problem

Does anyone who has a good knowledge of the wiring and can read the wiring diagrams any Idea what could have happened? Are there any wires that I could have removed on accident that could cause this? Can someone point me in the right direction what is necessary to be able to start the car and get back some power? I dont care about every single light working but of course I need the car to run https://forum.miata.net/vb/images/sm...smiley-013.gif
It is a 90 1.6 canada miata

Thanks in Advance!
haubi

Sounds to me like you removed a ground. Check that first.

I fixed it, somehow the connector on the ignition switch got loose...

thanks anyways