1.6 mk1 idle speed valve
Evening all, discovered today that my idle speed control valve has nuked itself
Has anyone blocked it off and ran it without? |
Yes. 1.6s have a second coolant based valve on the side of the intake manifold, so tune the bypass valve until it’s livable when cold and hot, and if I recall correctly, it’s not the worst idle once you’re done.
|
1 Attachment(s)
Attachment 227178
I blanked the isv on my '91 1.6L car. also removed the 'thermo-valve' from the inlet manifold & made a blanking-plate... first ~min after cold start needed some throttle-pedal covering but after that idle was stable[img]data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7[/img]. gone with itb' so had to use old photos. Rich. |
Originally Posted by Zed.
(Post 1605285)
https://i.imgur.com/3MUvOZo.jpg
I blanked the isv on my '91 1.6L car. also removed the 'thermo-valve' from the inlet manifold & made a blanking-plate... first ~min after cold start needed some throttle-pedal covering but after that idle was stable[img]data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7[/img]. gone with itb' so had to use old photos. Rich. |
Originally Posted by jdmtom
(Post 1605294)
Just read your reply on Facebook as well 🤣
Rich. |
Revisting this issue with an update.
Got a replacement Idle speed control valve ( the one below throttle body) and it made no real difference. Pissing about in settings on the Speeduino, under idle control I changed the Idle Valve Direction to reversed. And this seems to have solved the issue! |
All times are GMT -4. The time now is 09:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands