1.8 swap in Ct
Ok I swapped a 1.8 into my 93 with all the info I could search for but there's just a few connectors of which I can't figure out where they go. Is there anyone in the Ct area near Hartford that can help me figure this out I would appreciate it. Can't wait to fire it up! Thanx!
|
you can take pictures and post them here...maybe someone can help that way.
|
Ok I got pics on my phone just don't know how to put them in a post. I may try on my computer when I get home!
|
ok it took me a while but ive managed to get some pics! let me know if you guys can help!
http://i1022.photobucket.com/albums/...2/IMAG0473.jpg http://i1022.photobucket.com/albums/...2/IMAG0472.jpg http://i1022.photobucket.com/albums/...2/IMAG0471.jpg |
Originally Posted by Eunos93
(Post 781228)
ok it took me a while but ive managed to get some pics! let me know if you guys can help!
http://i1022.photobucket.com/albums/...2/IMAG0473.jpg http://i1022.photobucket.com/albums/...2/IMAG0472.jpg http://i1022.photobucket.com/albums/...2/IMAG0471.jpg The first picture is your coolant temperature sensor. You were supposed to swap that entire thermostat assembly from your 1.6 and put it on the 1.8. It's a pain in the ass to do because you need to remove a metal cover that is behind the cam gears. Basically it's like you're doing a timing belt replacement. Pic 2 and 3 That's a lot of connectors... I'm guessing all of those aren't connected to your motor but are from the chassis wiring. The one behind the motor is probably your CAS (you have to extend the wires to reach), and the other ones I'm not sure of. |
pic 2 grey and orange on the big vac line is for your coils i think. to the right of that is for your CAS
|
All times are GMT -4. The time now is 08:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands