Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   General Miata Chat (https://www.miataturbo.net/general-miata-chat-9/)
-   -   13 inch wheel with drag tire? (https://www.miataturbo.net/general-miata-chat-9/13-inch-wheel-drag-tire-43067/)

FastColt 01-19-2010 06:10 PM

13 inch wheel with drag tire?
 
I saw a picture a looooong time ago when i joined this forum of someone who had a 13 inch with a mickey T or an M&H slick on the rear. He had just gone to the track and borrowed them from a honda guy i think. Anyone have any clue what im talking about or are there any other pics with a similar set up? I have 13x8x24.5 m/t slicks and im trying to figure out what wheel setup will work the best. I want the least amount of tire poke as possible with out rubbing anything on the inner fender. I know this may be a little tough with such a tall tire. Any help would be awesome!

Full_Tilt_Boogie 01-19-2010 06:11 PM


Originally Posted by FastColt (Post 510363)
I saw a picture a looooong time ago when i joined this forum of someone who had a 13 inch with a mickey T or an M&H slick on the rear. He had just gone to the track and borrowed them from a honda guy i think. Anyone have any clue what im talking about or are there any other pics with a similar set up? I have 13x8x24.5 m/t slicks and im trying to figure out what wheel setup will work the best. I want the least amount of tire poke as possible with out rubbing anything on the inner fender. I know this may be a little tough with such a tall tire. Any help would be awesome!

Some diamond racing steelies would probably be your best bet, or rota RB's

both of which can be found in a 13x8 with several offset choices

therieldeal 01-19-2010 06:31 PM

Lenso makes a great 13x7.5 but the offset will probably result in serious fender rub.

FastColt 01-19-2010 06:47 PM

.I have a set of dimonds now but they are the wrong offset, the lensos are not available anymore I don't think. I was thinking of 13x7 with a 4" offset from dimond but I don't want tire poke.

miata2fast 01-19-2010 06:47 PM

Just to let you know, the sidewall width of the 13x24.5x8 is 10.5 inches wide. It maybe a problem getting it to work right. A 22x8x13 is over an inch narrower at the sidewall, and actually has a slightly wider tread width. Even a 15x24.5x8 is narrower than the 13" variant at the sidewall. You will have to get the backspacing just right to keep from hitting the coilovers.

Take your time and do some measuring. Go to the Mickey Thompson website and you can get all the tread, sidewall, and circumference specs.

I have a 15x22x8 and it tucks nicely under the fenders, and is plenty far enough away from the coilovers.

FastColt 01-20-2010 08:00 AM

https://www.miataturbo.net/forum/t23507/ there's the link I finally found, any one know what size wheel tire combo that is?

M-Tuned 01-20-2010 12:36 PM

I tried the 24.5 Slick on my 1990 Miata and it rubbed big time and all I had was a smoke show. NB wheel well looks a little bigger..

jtothawhat 01-20-2010 01:17 PM

Lenso like said above is what most civic guys run, weld also makes a 13" drag wheel i'm not sure on offset though.

KPLAFIN 01-20-2010 02:12 PM

I had a kick ass set of OOOOLLLLLLLDDDDD Magnesium Panasports on my '95, they were without a doubt the LIGHTEST wheel i have ever felt at ~6lbs a piece and they were 13X8, never seen another set just like 'em so doesn't help you out too much, I'll see if I can track that set down if you'd like?

FastColt 01-20-2010 05:02 PM

Yeah lemme know what you dig up! Do you happen to know the offset on those wheels? Also pictures would be awesome!


All times are GMT -4. The time now is 03:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands