84-85 RX7 GSL Differential
#9
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
from now on, refer to pig as the LSD. But yes, that's is all you would need.
You would bolt your ring gear onto it and drop it in, then adjust the backlash and reinstall.
they sometimes require rebuilds as the use multiple clutch plates to lock, so just as the clutch in the tranny wears, so can these....I was lucky with mine, clamps like the dickens, others not.
You would bolt your ring gear onto it and drop it in, then adjust the backlash and reinstall.
they sometimes require rebuilds as the use multiple clutch plates to lock, so just as the clutch in the tranny wears, so can these....I was lucky with mine, clamps like the dickens, others not.
#10
Senior Member
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Uniontown, OH
Posts: 507
Total Cats: 0
But how many miles ballpark estimate until it wears out? If I did have to rebuild it, where would I get the plates and how much would they cost? What all is involved in replacing them?
#14
read this.. then reread it .. read it a thrid time..
http://members.aol.com/solomiata/MiataVLSD.html
then search Miata.net and here with the terms used on that page to answers your questions, if this still doesn't answer them then form a specific question and make a post.
1337hax0rChris please start doing some searching on your own before posting. You are lucky they haven't banned you. I have a feeling you aren't going to get many more posts like this without getting sent to the corner (with dunce cap) for a while.
the RX7 LSD questions have been asked elventybillion times and is all over this forum and miata.net.
http://members.aol.com/solomiata/MiataVLSD.html
then search Miata.net and here with the terms used on that page to answers your questions, if this still doesn't answer them then form a specific question and make a post.
1337hax0rChris please start doing some searching on your own before posting. You are lucky they haven't banned you. I have a feeling you aren't going to get many more posts like this without getting sent to the corner (with dunce cap) for a while.
the RX7 LSD questions have been asked elventybillion times and is all over this forum and miata.net.
#15
Senior Member
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Uniontown, OH
Posts: 507
Total Cats: 0
read this.. then reread it .. read it a thrid time..
http://members.aol.com/solomiata/MiataVLSD.html
then search Miata.net and here with the terms used on that page to answers your questions, if this still doesn't answer them then form a specific question and make a post.
1337hax0rChris please start doing some searching on your own before posting. You are lucky they haven't banned you. I have a feeling you aren't going to get many more posts like this without getting sent to the corner (with dunce cap) for a while.
the RX7 LSD questions have been asked elventybillion times and is all over this forum and miata.net.
http://members.aol.com/solomiata/MiataVLSD.html
then search Miata.net and here with the terms used on that page to answers your questions, if this still doesn't answer them then form a specific question and make a post.
1337hax0rChris please start doing some searching on your own before posting. You are lucky they haven't banned you. I have a feeling you aren't going to get many more posts like this without getting sent to the corner (with dunce cap) for a while.
the RX7 LSD questions have been asked elventybillion times and is all over this forum and miata.net.
#16
http://forum.miata.net/vb/showthread.php?t=200846
6 M020-27-258 -FRICTION PLATE $17.05 $102.30
2 M020-27-256 - WASHER $23.60
$47.20
AND
2 M020-27-257 - WASHER $23.60
$47.20
TOTAL $196.70
Now STFU and listen to someone giving you good advise. You think i'm joking about you getting banned then keep on asking stupid questions without doing any research.. i'm not saying this to be mean.. i'm trying to ******* help you..
Now slow your roll and do as your told newbie.
6 M020-27-258 -FRICTION PLATE $17.05 $102.30
2 M020-27-256 - WASHER $23.60
$47.20
AND
2 M020-27-257 - WASHER $23.60
$47.20
TOTAL $196.70
Now STFU and listen to someone giving you good advise. You think i'm joking about you getting banned then keep on asking stupid questions without doing any research.. i'm not saying this to be mean.. i'm trying to ******* help you..
Now slow your roll and do as your told newbie.
#17
Senior Member
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Uniontown, OH
Posts: 507
Total Cats: 0
Alright alright, chill out, my point was that this information was no where on THIS site, and I would rather learn from people on here because they do stuff right when they build a setup
#18
For some reason and i'm not certain why you don't seem to get the idea that this isn't the only website on the internet.
Google it up **********!
Please keep fighting, it always cracks me up when a newbie gets banned for being an asshat. I'm totally calm I only used expletives because you didn't seem to be grasping English without them.
Google it up **********!
Please keep fighting, it always cracks me up when a newbie gets banned for being an asshat. I'm totally calm I only used expletives because you didn't seem to be grasping English without them.
#19
Senior Member
Thread Starter
iTrader: (13)
Join Date: Mar 2008
Location: Uniontown, OH
Posts: 507
Total Cats: 0
So, next time I want the opinion of miataturbo members, I am suppose to ask google? I understand I could have found prices from there. I found some on rx7club.com, but I wanted to know what the other people from here thought. Shopping around includes talking to people too. It wasn't like I asked "what is a clutch style lsd"? That would have been a noob question. I really don't see the entire problem you have with me for asking an opinion question, and asking how much the rebuild would cost in an attempt to get an idea of what a good price is.
#20
So, next time I want the opinion of miataturbo members, I am suppose to ask google? I understand I could have found prices from there. I found some on rx7club.com, but I wanted to know what the other people from here thought. Shopping around includes talking to people too. It wasn't like I asked "what is a clutch style lsd"? That would have been a noob question. I really don't see the entire problem you have with me for asking an opinion question, and asking how much the rebuild would cost in an attempt to get an idea of what a good price is.