budget exhaust?
i remember reading something on the forum about a cheap route to go on a 3" exhaust...if i remember correctly it had something to do with some pre bent 3" SS piping.
i have been searching the forum for a couple hours now and i havnt turned anything up! now as far as my setup goes i will running a BEGI SG downpipe and a metal core cat! for the cat back i simply want to do a 3" exhaust all the way to the back with no resonators or mufflers! can anybody give me some leads to go on? |
just get a mandrel bent 3" pipe made, weld a flange to it that mounts to your downpipe and you're good to go.
|
all the muffler shops that i know of around where i live all use crush benders.......im not willing to put crush bends on my car!
|
dont bother with stainless if you're on a budget. get alumized steel.
|
|
Originally Posted by Cspence
(Post 417599)
i tried searching for pre bent pipe on ebay......but my search didnt end up to well. what kind of steel did you use for the exhaust? on a side note, props on all your fab work! looks very very good....and clean. |
Originally Posted by y8s
(Post 417597)
dont bother with stainless if you're on a budget. get alumized steel.
|
Originally Posted by WonTon
(Post 417609)
i like it!
i tried searching for pre bent pipe on ebay......but my search didnt end up to well. what kind of steel did you use for the exhaust? on a side note, props on all your fab work! looks very very good....and clean. |
Sean.... please step away from the exclamation (!) key...as a matter of fact, just remove the 'shift' key from your keyboard so you will not be tempted to use it.
Summit carries a generic 3" exhaust kit of aluminized steel.... i'll go in on half with you since half the "kit" will probably do one Miata...and you can pick it up directly from them. FLO-15937 Flowmaster 15937 Flowmaster 15937 - Flowmaster U-Fit Dual Pipe Kits |
I bought all my mandrel bent pipe from Colombia River (a sponsor on these here boards as a matter of fact...).
|
Or you can support our forum sponser Tube Bending & Fabrication - Columbia River Mandrel Bending
Recieve extra discount Discount code for Miata turbo members : MT5M |
Industrial grade 2.5" 16 gauge 304 elbows are fairly cheap (~$15 each from my source), this is what I used to build my exhaust.
This is what they use in food and beverage equipment and is widely available. 16 gauge is a bit thick, but easy to weld and will take a real beating. |
Interesting, didn't know we had a pipe vendor on here. I'll be looking them up soon...
|
Originally Posted by Doppelgänger
(Post 417850)
Interesting, didn't know we had a pipe vendor on here.
|
Yeah, they are a great supplier, and their shipping is really quick.
|
Mike, ill keep the summit thing in mind.
if i do go the summit route ill be getting mild steel, so that way i can weld it myself. back of my punctuation! haha i did look through Columbia River Mandrel Bending but i only looked at there stainless piping. |
Originally Posted by WonTon
(Post 417917)
...
if i do go the summit route ill be getting mild steel, so that way i can weld it myself.... |
bucause, the welder that i will have access to is set up for mild steel, and its a MIG. if i go stainless i want to TIG weld it but i do not have access to a TIG welder.
|
did you want stainless in the first place? How were you going to weld it that way. Also you can MIG stainless too... just need a back purge :2cents:
|
Originally Posted by WonTon
(Post 417612)
...i want stainless because my downpipe is stainless...if i do go the summit route ill be getting mild steel
|
All times are GMT -4. The time now is 02:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands