Cam gear reinstall alignment
Hey guys, I can't seem to find my Chilton and google is failing to correctly cover the information I need. I have a 99 head and I'm trying to put the cam gears back on but can't figure where the notches on the cams go relative to the 3 possible spots on the gears..
Anyone have a picture? :facepalm: |
1 Attachment(s)
|
Really I just need to know which place on the cam gear the notch goes for each cam. They came back from the machine shop uninstalled and I can't recall how they mount.
|
Bump on cam should line up with the I mark on the cam gear on the Intake side and E mark on the Exhaust side. I hope that makes sense.
|
It's usually a little easier to point the #1 lobes away from each other, then align the marks like you'd be timing it, they should be +/- 20* and easy to see which goes where.
|
Intake dowel pin lines up with I. Exhaust dowel pin lines up with E.
|
Thanks for the help, I was really stuck on that part.
|
So the picture CLEARLY showing this information in post #2 was not good enough.
I'm done helping people. |
No it did. I was pretty drunk for most of the weekend and your picture didn't load (so all I saw was 'it should be marked') on my phone when I wrote that response. :facepalm:
|
lol alright...good luck
|
All times are GMT -4. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands