can't find the cool sheetmetal radio / gauge holder
Its all one piece, silver in color, and not painted or anything. Its one piece that bolts in place and holds the radio, 2,3 or 2 gauges and a few LED's.
Thanks for the help. |
DDM Works.
I have one, the fit is outstanding. |
awesome, thanks.
|
www.rspeed.net sells the DDM Works. Fit and finish is great.
|
:werd: Mine is "normal" install with the gauges under the radio. BUT I believe somebody installed it flipped so the gauges were above. Might be worthwhile looking into since you're tracking the car. :dunno:
|
Mitch "brokeenthusiast" had one he pulled out of his miata when he de turboed it. It was in the classifieds here, don't know if it's sold or not. You should email him to see if he's still got it.
I thought the DDM piece was pricey for what it is... So I made my own DIN panel from carbon fiber and cut it for gauges. (actually 1 gauge and 1 power outlet but whatev) |
Yeah I plan on making one myself removing my HVAC and replacing it with a CarPC monitor, 3 gauges, then 3 switches probably just using flat aluminum or plastic and painting it black.
|
Originally Posted by Ben
(Post 130814)
Mitch "brokeenthusiast" had one he pulled out of his miata when he de turboed it. It was in the classifieds here, don't know if it's sold or not. You should email him to see if he's still got it.
I thought the DDM piece was pricey for what it is... So I made my own DIN panel from carbon fiber and cut it for gauges. (actually 1 gauge and 1 power outlet but whatev) |
Originally Posted by m2cupcar
(Post 130809)
:werd: Mine is "normal" install with the gauges under the radio. BUT I believe somebody installed it flipped so the gauges were above. Might be worthwhile looking into since you're tracking the car. :dunno:
|
Originally Posted by hustler
(Post 130850)
I have an a-pillar dual pod thingy, but I don't want the ricer look.
But personally I like having my important gauges in an easy to view location without having to look around or down. I have a full dual pod, not one of those "screw over your pillar" kind though. Plus a DDMWorks dual gauge radio mount. |
it's rice when the boost gauge won't go over 0 ;)
That's where my boost gauge sits. EGT, oil temp and a/f are in the DDM center mount. I think they're pricey bacause they're ss and hand made. Mine was a prototype that had bend marks in it, so it was cheap. I just had it black crinkle powder coated when I did the cam cover bits. I think the location is fine for a street car- track car maybe... Racer would want them near the wheel. |
hustler if it's really going to be a track car, pull out the radio and replace the whole area with a sheet of ABS, that will give you a ton of room for gauges. If you are planning to drive in and back from the track, drill in an ipod adaptor (just a headphone plug) and run it to a small amp in the trunk.
Rob, that's a good call. The other "bad" thing about the DDM piece is it's shiney. I would think that it would be annoying as hell with the top down. But what do I know, I don't have one. Ben |
Originally Posted by RotorNutFD3S
(Post 130863)
I still don't understand why having a pillar pod is considered rice.
Hustler why don't you put the gauges in the center vent holes instead.The best part about that is it's free,I know you like free. |
I haven't had any issue with reflections. Once you have 3 gauges and an HU mounted there is surprisingly little of the thing showing.
It's pretty and I like it! |
Originally Posted by Ben
(Post 130871)
Rob, that's a good call. The other "bad" thing about the DDM piece is it's shiney. I would think that it would be annoying as hell with the top down. But what do I know, I don't have one.
|
I'm not a huge fan of the a pillar pod either ... I've got a boost gauge installed there. Everyone behind me can see it and it feels like every idiot with a civic, 240 or DSM piece of shit wants to race me. So I wouldn't say it is rice, but it attracts it.
|
TDR does make one, but I'm not sure if it's an M2 only piece.....
http://www.trackdogracing.com/website/gauges_types.htm Dave, |
I went on the DDM works website and they stopped selling the sheet metal radio/gauge holder that has no holes drilled.That sucks,I fucking should have bought one when they were on sale and still in stock.
|
Try sending them an email, they might be able to accomodate you.
|
Originally Posted by spike
(Post 130922)
I went on the DDM works website and they stopped selling the sheet metal radio/gauge holder that has no holes drilled.That sucks,I fucking should have bought one when they were on sale and still in stock.
My FS post on CR.net: http://www.clubroadster.net/forum/vi...024&highlight= |
All times are GMT -4. The time now is 04:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands