Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   General Miata Chat (https://www.miataturbo.net/general-miata-chat-9/)
-   -   Is the center exit exhaust better ? (https://www.miataturbo.net/general-miata-chat-9/center-exit-exhaust-better-65002/)

DanielzZz 04-09-2012 06:33 PM

Is the center exit exhaust better ?
 
Is the center exit exhaust better,performance wise ? Pipe bendings must slow down exhaust gasses ?
Please,share your :2cents: on this.
P.S. Discussion is about turbocharged cars ONLY.

miata2fast 04-09-2012 06:37 PM

What difference does it make on form of power adder?

The only reason I could think of a reason for the center outlet is for aesthetic reasons only.

Bryce 04-09-2012 06:51 PM

Left exit exhaust would technically be the best, but the difference between that and a right exit would not ever, ever, ever be felt.

curly 04-09-2012 06:56 PM

It's supposed to eliminate some turns, but you still need to turn towards the center, and then turn towards the bumper.

Technically, if you want less bends, you'll put it between the passenger side and center, directly aft of where it exits by the diff.

Faeflora 04-09-2012 07:11 PM

Five inch turn down. Or turn up out of hood.

Now go kill yourself cus you will never make more than 300hp.

miata2fast 04-09-2012 07:18 PM

I see where this is going.

vehicular 04-09-2012 07:59 PM

I built a center exit exhaust to keep forces around my diffuser symmetrical side to side.

DanielzZz 04-10-2012 03:52 AM

So...there will be no noticeable difference ? Even in spool ?

Boost Joose 04-10-2012 07:49 AM


Originally Posted by vehicular (Post 861668)
I built a center exit exhaust to keep forces around my diffuser symmetrical side to side.

I'm doing this......

Boost Joose 04-10-2012 07:53 AM


Originally Posted by DanielzZz (Post 861813)
So...there will be no noticeable difference ? Even in spool ?

10 RPM

But seriously, no, a center exit exhaust will not gain you more spool. lol

If you want spool, make your engine bigger, run a 4" exhaust, keep charge pipes short, get a good flowing IM, run a turbo with ball bearing/billit/titanium wheels, get a V8, run anti-lag, run a small turbo, get a sewing machine. Thats all I got.


All times are GMT -4. The time now is 07:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands