akaryrye

iTrader: (5)

I finally got around to taking some pictures after my Megasquirt install. Some people were asking about the harness and whatnot. Today, I spent some time fabricating an intake pipe from a 2.5" mandrel bend, first real fab work Ive done so far. Anyway, enjoy ... and yes I know its got a pretty fucked up interior but nobody seems to car when i step on the gas now















For this one, notice the timeslips, the dashboard smily face (compliments of my soldering gun), and the gauges showing it idling at 15:1 AFR and about 23 inches/32kpa

cjernigan

iTrader: (13)

I like the engine bay. The interior is holy **** crazy though.

miatamania

iTrader: (9)

And I thought my interior is all sorts of fucked up


is that stock harness wired in to your ms?

UofACATS

iTrader: (1)

Nice. Got it where it counts..

akaryrye

iTrader: (5)

Thank you I'd written off the interior long ago and figured the car was a racecar and racecars do not need to be pretty. That harness is a boomslang female ecu harness. i can unplug it and plug the stock ecu in if i want ... although it wouldnt start. I did that so when emissions testing time comes in a year, i can put the AFM and stock injectors back on and pass without worries.

Pitlab77

iTrader: (3)

do not usually see a cleaner engine bay than the interior. :gay:

cjernigan

iTrader: (13)

Here that should be the standard. Cleaner engine bay than interior or BAN!
j/k
Nice intake elbow BTW.

akaryrye

iTrader: (5)

I am very proud of the engine bay, it is where much of my work has gone into

cjernigan

iTrader: (13)

If i had an early model that wasn't very pretty, it would be stripped and shitty looking but i guarantee it would be fast.
Just like yours! (fast, not shitty looking)

Mymiataflys

I would consider wrapping the heater core hose that passes across the downpipe.

akaryrye

iTrader: (5)

good idea.

Splitime

iTrader: (24)

So you ran an IAT sensor line into the stock engine harness? Did you also do something engine harness side for the fuel pump?

hustler

iTrader: (6)

1.6 car right?

supra441979

iTrader: (10)

yes 1.6 and is that your 97 camry next to it?

Braineack

iTrader: (62)

sigh...i cant wait till i run MS and pull my afm and trun my filter in that spot behind my naca duct.

akaryrye

iTrader: (5)

nah, my parents went to greece for spring break so i get to watch their nice big house for em. Been staying there every night actually, nice tv, pool, spa, free food, garage to do work in with tools like a mig welder, bench grinder, etc. The Camry is my sisters first car. My 97 (not pictured) is a miata and it is stock. Its really a lot of fun to drive out of the box.

curly

iTrader: (25)

that's not too bad, dust off the dash...get a junk yard dash front piece...could be worse, could have no dash

speedracerTD04

niceee

jsisco

iTrader: (7)

I just stumbled upon this post looking for the boomslang ecu connectors. This picture is erotic. Does it remind anyone else of a girl in an extremely high cut shirt? Mmmm.. miata ****.

m2cupcar

iTrader: (5)

I'd like to upgrade that to "holy **** STORM crazy"
your Miata is clearly illustrates from follow function