clutch slave cyl help
ok so im outside trying to bleed the clutch and im pretty damn sure that the piston in the slave cyl is supposed to push out when pressing down the clutch. its doing nothing.. i beleive that the rubber boot around it is leaking because there is a small puddle of fluid under the slave cyl... my slave cyl is brand new and came preassembled.
why wont my clutch bleed at all.. nothing but fluid is coming out |
So, when you are pushing the clutch down, you do have the bleeder valve closed right?
|
Sucks. Either a) your bleeder is unscrewed, b) your clutch line is cross-threaded or fucked in some way, or c) you got really bad luck and have a bad seal or a scored cylinder from the factory. (unlikely)
|
Originally Posted by wes65
(Post 448773)
So, when you are pushing the clutch down, you do have the bleeder valve closed right?
bleeder closed push down clutch slowly open bleeder close bleeder release clutch repeat |
just found out the fluid isnt coming from the rubber boot but above it.. i was pressing the plunger in and then out and i cought a drip go down to the boot..
|
Originally Posted by bayside blue
(Post 448781)
yup.
bleeder closed push down clutch slowly open bleeder close bleeder release clutch repeat |
All times are GMT -4. The time now is 12:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands