Connector Witch Hunt
#161
So I've taken a shitload of pics, might be a little fuzzy in some. All come from a 94 1.8 (euro spec if it matters) except for the VVT ones obviously.
Alternator connector:
VTPS:
CLT sender for ECU, back of head:
Big connector from injector harness, female side:
Big connector from injector harness, male side:
Big pronged orange connector, I forget what it's for. Male side:
Big pronged orange connector, female side:
OEM narrowband O2 connector:
Now for the VVT motor:
Temp sender for gauge and ECU:
Cam sensor (I need this pigtail!!):
Crank sensor (I need this pigtail!!):
VVT actuator (I need this pigtail!!):
OEM NB knocksensor:
And a bonus, I have no idea what it is. It's bolted to the CAS block off plate on the VVT motor:
Alternator connector:
VTPS:
CLT sender for ECU, back of head:
Big connector from injector harness, female side:
Big connector from injector harness, male side:
Big pronged orange connector, I forget what it's for. Male side:
Big pronged orange connector, female side:
OEM narrowband O2 connector:
Now for the VVT motor:
Temp sender for gauge and ECU:
Cam sensor (I need this pigtail!!):
Crank sensor (I need this pigtail!!):
VVT actuator (I need this pigtail!!):
OEM NB knocksensor:
And a bonus, I have no idea what it is. It's bolted to the CAS block off plate on the VVT motor:
Last edited by Oscar; 04-12-2013 at 12:50 PM.
#165
@Leafy - no the LAST pic - the 2 position connector attached to the CAS blockoff plate.
The VTPS connector:
Is a AMP SSC 4 position
Part.Nr. 184046-1
AMP SSC 4 Position Housing Key - A [Black] [184046-1] : New United Race Tech, New United Race Tech
@Oscar - have you got pics of the IAC connector?
The VTPS connector:
Is a AMP SSC 4 position
Part.Nr. 184046-1
AMP SSC 4 Position Housing Key - A [Black] [184046-1] : New United Race Tech, New United Race Tech
@Oscar - have you got pics of the IAC connector?
#167
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
I just requested a sample of this to test. I'm going to be tuning a miata who at one pont had a different TPS and TB install and the stock connector was cut off, it has since returned to the stock TPS but simple has contacts slide over the pins and glued in place. I'd like to repair this.
yeah:
#171
Ah, now I see...
About the Alternator connector:
From the pics I think that the terminals are quite big (looks like 6.3mm) so the connector could be this one:
http://www.newunitedracetech.com/sho...6_944_1303_945
About the Alternator connector:
From the pics I think that the terminals are quite big (looks like 6.3mm) so the connector could be this one:
http://www.newunitedracetech.com/sho...6_944_1303_945
Last edited by Zaphod; 04-12-2013 at 04:15 PM.
#174
Read through the post... Awesome info. Does anyone have the part for the power window connector? The 6 pin big white one, typically under the console in an NA Saw the one for 99, but this is two rows of 3 connectors, female and white. Any help would be great! The other side of the connector, the one it plugs into has the following on it 055-3x10. Not sure if that helps.
#175
Elite Member
Thread Starter
iTrader: (1)
Join Date: Jun 2012
Location: NH
Posts: 9,479
Total Cats: 104
Not 100% sure. I do know that its one of the housing that have normal spade connectors. Female side on the chassis, obviously. If you just want to pull gauge power and ground from there, jamming spade connectors into it is perfectly acceptable IMO.
#176
Read through the post... Awesome info. Does anyone have the part for the power window connector? The 6 pin big white one, typically under the console in an NA Saw the one for 99, but this is two rows of 3 connectors, female and white. Any help would be great! The other side of the connector, the one it plugs into has the following on it 055-3x10. Not sure if that helps.
ah.. just Googled it
Here is a pic:
This one should be fitting
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural]
Part No. 6070-6481
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural] [6070-6481] : New United Race Tech, New United Race Tech
#178
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
I take out my NA console anyway - I will have a look at the connector.
ah.. just Googled it
Here is a pic:
This one should be fitting
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural]
Part No. 6070-6481
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural] [6070-6481] : New United Race Tech, New United Race Tech
ah.. just Googled it
Here is a pic:
This one should be fitting
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural]
Part No. 6070-6481
Sumitomo 250 type connector 250(6.0mm) 6 Position Female Housing [Natural] [6070-6481] : New United Race Tech, New United Race Tech