crank pulley
hi does anyone know if the 1.8 crank pulley is the same as the 1.6 fitting wise as i want a alloy crank pulley (know they can damage your engine as it is removing the damper but the look nice)can only find 1.8 for sale but i have a 1.6
thanks lee |
sorry, not the same crank pulley.
|
is it as simple as that? Aren't there 90-91 pulleys and then 91.5-93 pulleys?
90-93 uses a v-belt for the water pump and alternator. 94+ uses a ribbed belt. you would need those pulleys from a 1.8. As far as fitment of the pulley on the crank, it must bolt right up because TurboTim runs his stock 1.6 pulley(92) on his 94 motor |
Originally Posted by paul
(Post 242022)
is it as simple as that? Aren't there 90-91 pulleys and then 91.5-93 pulleys?
They say that any pulley other than OEM can cause problems with the oil pump and main bearings. Just something I read when I was looking up info on them. OP might want to read up on that stuff... The part # on the short-nose 89-91 is: B6S7-11-401A It will fit vin numbers up to: 209446 Here's a link to a ebay auction that I sold a spare pulley a couple weeks ago. http://cgi.ebay.com/ebaymotors/ws/eB...233265926&rd=1 Vash- |
There are two types of 1.6 crank pulley. Short Nose and Long Nose.
If you have a Long Nose then you could swap to a 1.8L crank pulley but you would also have to swap to a 1.8L alt also. If you have a Short Nose you are SOL |
i read all those supposed issues with the lighter non-harmonicly dampered pulleys. i've run one for 200k miles. i run one on my 300hp stock 99 motor. and i run the lightest smallest one i've ever seen. it only has pulley for the water pump/alt. It's an Unorthodox Racing Ultra R. Go figure
http://www.miatamx5.com/UR_crank_pulley_2.jpg |
i have a long nose crank wiv a V belt not a ribbed will i need a 1.8 water pump pulley aswel then
|
^^^^^^ thats what i was planning on doing, macining the unused pulley off
|
Originally Posted by paul
(Post 242102)
i read all those supposed issues with the lighter non-harmonicly dampered pulleys. i've run one for 200k miles. i run one on my 300hp stock 99 motor. and i run the lightest smallest one i've ever seen. it only has pulley for the water pump/alt. It's an Unorthodox Racing Ultra R. Go figure
http://www.miatamx5.com/UR_crank_pulley_2.jpg Vash- |
Originally Posted by paul
(Post 242102)
i read all those supposed issues with the lighter non-harmonicly dampered pulleys. i've run one for 200k miles. i run one on my 300hp stock 99 motor. and i run the lightest smallest one i've ever seen. it only has pulley for the water pump/alt. It's an Unorthodox Racing Ultra R. Go figure
Talk about eating your words. Now I am gonna be going the other way and probably getting one of those ATI harmonic balancers. Or maybe billet oil pump gears. Definitely not both though. Anyone wanna buy an Unorthodox Racing Ultra R underdrive pulley? :bang: |
Originally Posted by paul
(Post 245031)
Ignore what this guy says. He might have just exploded his oil pump on Saturday bouncing off the rev limiter cuz all it does is break loose in 2nd gear.
Talk about eating your words. Now I am gonna be going the other way and probably getting one of those ATI harmonic balancers. Or maybe billet oil pump gears. Definitely not both though. Anyone wanna buy an Unorthodox Racing Ultra R underdrive pulley? :bang: You think that's what caused the fail on the oil pump. I do remember reading an awful lot of shit about needing the balance for the oil pump and bearings. Put that pulley up on ebay!!! :) Vash- |
Originally Posted by paul
(Post 245031)
Ignore what this guy says. He might have just exploded his oil pump on Saturday bouncing off the rev limiter cuz all it does is break loose in 2nd gear.
Talk about eating your words. Now I am gonna be going the other way and probably getting one of those ATI harmonic balancers. Or maybe billet oil pump gears. Definitely not both though. Anyone wanna buy an Unorthodox Racing Ultra R underdrive pulley? :bang: |
All times are GMT -4. The time now is 02:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands