Cranks but wont start. No ecu power???
So I have a 95 turbo car. has been running and driving for a while but the clutch started slipping so its been down for a bit now. I got around to doing the clutch this weekend and got it all back together went to crank it up and nothing. just cranked and cranked. Seemed like I wasn't getting any fuel so I did some digging and some research and decided my main relay had given up which seems to be pretty common. So I ordered a ne one and threw it in today and nothing. was pretty confused because I thought that's what it was. So I grabbed my laptop to see if I could make mega squirt do anything (don't know why i thought this but whatever) but I couldn't connect to the ECU.
So I guess I'm not getting any power to my ECU?? I don't even know where to go from here. i did a little bit of looking and couldn't find a dedicated fuse for it or anything but i just walked away because i was frustrated. Anyone have any ideas? Did I just not do the right research? Any help would be really amazing. I was super stoked to get my car back up and running but now I got nothing. Thanks guys. |
Check for B+ on the white/red wire at the MS. And double check you reinstalled your ground on the ppf, that’s the only clutch thing I can think of that you might’ve forgotten
|
Nvm, I see you have two threads on this.
|
Originally Posted by curly
(Post 1607536)
Nvm, I see you have two threads on this.
|
All times are GMT -4. The time now is 05:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands