My car makes me smile.
12-19-2007, 03:34 PM
#1
Elite Member
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: Marietta, GA
Posts: 2,195
Total Cats: 1
My car makes me smile.
Finally got the rest of my suspension stuff installed today. Besides the usual creaks, groans, rattles, etc. that come with a 165k chassis, my car is finally at a point where I'm happy...for now. It now handles the way the speed would indicate it should.
I was beginning to wonder why I spend so much effort on the car, but after setting the ride height and going for a spin, it all came back to me.
I was beginning to wonder why I spend so much effort on the car, but after setting the ride height and going for a spin, it all came back to me.
Reply
0
0
Congrats.
12-19-2007, 03:53 PM
#4
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I went to Atlanta and back in mine today. 15psi does it for me 
What was your final suspension set up? And why didn't you come over and use the lift.
PS, feel free to donate anything left over...
What was your final suspension set up? And why didn't you come over and use the lift.
PS, feel free to donate anything left over...
Reply
0
0
12-19-2007, 04:48 PM
#5
Elite Member
Thread Starter
iTrader: (5)
Join Date: Sep 2006
Location: Marietta, GA
Posts: 2,195
Total Cats: 1
8psi will keep me going until my house deal goes through, and I have a real garage to work in 
EBC is in, I just haven't tweaked or tuned it yet. I'm resisting the bug for more boost as long as I can; the clutch isn't rated for much more than ~200 ft-lbs at the flywheel, so it's a slippery slope with upping boost.
I ended up with FCM sleeves/perches/mounts/stops with 300/220 springs with an NB front sway and no rear. I set it for the same ride height as before for now, just so alignment can wait until the spring.
I did the job piecemeal, because I didn't have any large chunks of time to donate to working on it. That's why I did it in my little garage on jack stands. Plus, it gave me a chance to try out my new jack...what a beast! Ben, if you want some FCM bumpstops, I have a spare set of both the 46mm and 54mm bumps.
When I removed the shocks, it turned out one of the rear shocks had indeed blown the cap loose and leaked all the oil, as I had feared. Thankfully, I have a spare set of R-pkg Bilsteins, so I just used one of those rears. Worked great!
EBC is in, I just haven't tweaked or tuned it yet. I'm resisting the bug for more boost as long as I can; the clutch isn't rated for much more than ~200 ft-lbs at the flywheel, so it's a slippery slope with upping boost.I ended up with FCM sleeves/perches/mounts/stops with 300/220 springs with an NB front sway and no rear. I set it for the same ride height as before for now, just so alignment can wait until the spring.
I did the job piecemeal, because I didn't have any large chunks of time to donate to working on it. That's why I did it in my little garage on jack stands. Plus, it gave me a chance to try out my new jack...what a beast! Ben, if you want some FCM bumpstops, I have a spare set of both the 46mm and 54mm bumps.
When I removed the shocks, it turned out one of the rear shocks had indeed blown the cap loose and leaked all the oil, as I had feared. Thankfully, I have a spare set of R-pkg Bilsteins, so I just used one of those rears. Worked great!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
