Dynoed @ 136whp
08-31-2008, 06:06 PM
#22
It don't take **** to make a BP rev to 8K. A crystal swap is all it takes. My motor has turned 8K many many many times. But it doesn't make any power up there. Doesn't mean it won't do it though. All those people that think valves float before 8K on a 99' motor are WRONG!
Reply
0
0
08-31-2008, 07:02 PM
#26
Junior Member
Thread Starter
Join Date: May 2007
Location: Homestead Fl.
Posts: 92
Total Cats: 1
Thats why i put "remember correctly" but no we did do runs based on mph as opposed to rpm's
i already knew why it was able to do that, im the one who replaced the crystal
and no i dont go to MM meets, i dont even know what that is. my best time was a 16.27@85.73 mph.
oh and i am more than willing to put my car back on a dyno to see what a different one says.
oh and i am more than willing to put my car back on a dyno to see what a different one says.
Reply
0
0
08-31-2008, 07:45 PM
#27
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
OP, get bent. You didn't make 136whp, you didn't make peak power at 8000rpm, and at 90mph you're only turning 7600rpm anyway so you didn't even pull to 8k, if you stop at 90mph like you say you did. Feel free to stand by your bullshit, but expect to stand by a ban as well. Go confirm your numbers on a properly calibrated Dynojet.
The last guy who gave some total bullshit figure like 136whp with intake and exhaust got called out, and me and one other guy Paypalled him $20 each to pay for a re-dyno with the agreement that we would get double our money back if he didn't match his previous numbers.
Easiest $40 I ever made.
The last guy who gave some total bullshit figure like 136whp with intake and exhaust got called out, and me and one other guy Paypalled him $20 each to pay for a re-dyno with the agreement that we would get double our money back if he didn't match his previous numbers.
Easiest $40 I ever made.
Reply
0
0
08-31-2008, 07:53 PM
#28
Junior Member
Thread Starter
Join Date: May 2007
Location: Homestead Fl.
Posts: 92
Total Cats: 1
The last guy who gave some total bullshit figure like 136whp with intake and exhaust got called out, and me and one other guy Paypalled him $20 each to pay for a re-dyno with the agreement that we would get double our money back if he didn't match his previous numbers.
Easiest $40 I ever made.
Easiest $40 I ever made.
Reply
0
0
08-31-2008, 07:56 PM
#29
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
but it doesnt bother me if my car makes less than 136whp, hell as i already stated, im skeptical about it myself, always have been, but at the same time those were the numbers i was given when it was dynoed, i even asked the operator if those where at the crank or the wheels a couple times and he told me it was at the wheels each time.
Reply
0
0
WOW, and to think all his (non-miata) friends probably believe him.
08-31-2008, 08:43 PM
#36
Junior Member
Thread Starter
Join Date: May 2007
Location: Homestead Fl.
Posts: 92
Total Cats: 1
Exactly how am i stubborn? I agree i think my number is high, but until dynoed otherwise i'll stand by my 136whp, that was on a dyno that other people where making CORRECT numbers on. i made sure my vehicle was intentionally not the first one.
Reply
0
0
08-31-2008, 08:56 PM
#38
Junior Member
Thread Starter
Join Date: May 2007
Location: Homestead Fl.
Posts: 92
Total Cats: 1
i wouldnt have a clue, the only performance part that i got for the car that i know about was your old header. which my parents lost the end piece to it. 
EDIT: i just looked at Fuji racing and there prices are horrible.
EDIT: i just looked at Fuji racing and there prices are horrible.
Last edited by redrumracer; 08-31-2008 at 09:29 PM.
Reply
0
0
