Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   General Miata Chat (https://www.miataturbo.net/general-miata-chat-9/)
-   -   Ebay Front lip (https://www.miataturbo.net/general-miata-chat-9/ebay-front-lip-67635/)

FowlerMotorsports 08-06-2012 12:03 AM

Ebay Front lip
 
I have seen a few people running an ebay front lip and most running the Garage Vary lip, how does the ebay lip hold up? Price seems fair enough but then again you get what you pay for, anyone have experience with these?

buffon01 08-06-2012 02:08 AM

Soviet has one and says they're good.

vortexblue 08-06-2012 03:49 PM

It was twisted in the box (removed from mold too soon?), but bolted up fine.
I used a bunch of clips to line it up before drilling.

https://www.miataturbo.net/attachmen...ine=1343400431

terrible pic to show the invisible front lip... <shrug>

mgeoffriau 08-06-2012 03:51 PM

1 Attachment(s)
If you've never installed one, the best trick I've found is to "borrow" a bunch of large binder-clips from your workplace and use them to hold it in place while you adjust the fit and drill the holes. 6 or 7 is enough to do the trick.

https://www.miataturbo.net/attachmen...ine=1344282718

FowlerMotorsports 08-06-2012 09:33 PM

Is there any differences between the ebay lips? some offer $70 ones and others are like $150, wha tha fook?

soviet 08-06-2012 10:34 PM

I'm rocking the cheapest one, scrape it twice errryday on my driveway, bumped it many times while parking too close and it's fine. I also saw a GENUINE GARAGE VARY up close and when new I couldn't tell the difference

Has some scratches now but fine. And yes, it came twisted in the box, bolted up fine, and the GIANT PAPER CLIP sounds like a great idea.

Picture of current state of the lip
http://s95367906.onlinehome.us/photo...t/DSC_0762.jpg

I'm sure I could buff the scratches out or something, but like I care?

soviet 08-06-2012 10:37 PM

I looked in my email and the one I have is from "IKON Motoring". It was $115 when I got it, now, apparently, it's $74. lol. I'm sure nothing changed about it either.

One I bought:
MAZDA MIATA MX5 MX-5 GV POLY URETHANE FRONT BUMPER LIP SPOILER BLACK 90-97 | eBay

Same one for sale now:
MAZDA MIATA MX5 MX-5 GV POLY URETHANE FRONT BUMPER LIP SPOILER BLACK 90-97 | eBay

...I should buy another one

FowlerMotorsports 08-06-2012 11:26 PM

Thanks soviet you rock, looks like i'm about to get me one of these

TorqueZombie 08-07-2012 01:40 PM

It's too bad I can't find anything they make for an NB. Can't find a GV lip for a '99 to save my life. Well without getting raped and no phone call. Not about to spend the cash for a '01-'05 and find it doesn't fit at all.

zeroox 08-07-2012 02:08 PM

I got the $80 ebay one. looks like it is decent qulity. basically seemed like the same thing i had on my R. I would like to find a rear one for under $100 now... any suggestions?

soviet 08-07-2012 02:25 PM


Originally Posted by TorqueZombie (Post 912488)
It's too bad I can't find anything they make for an NB. Can't find a GV lip for a '99 to save my life. Well without getting raped and no phone call. Not about to spend the cash for a '01-'05 and find it doesn't fit at all.

time for a NB2 front end swap (I think all you need is bumper and headlights)

TorqueZombie 08-07-2012 04:12 PM


Originally Posted by soviet (Post 912513)
time for a NB2 front end swap (I think all you need is bumper and headlights)

From some digging around I think I can get away with just doing the bumper and then the headlights later when funds allow. I have a ffeling that won't happen since when people put '01+ headlights in a '99 there is a gap. So the '99 headlights will push into a '01 bumper. Might just live with a lip'less NB for a while. Wish some one had a stock style lip they hated and would trade for something stupid I have in my garage I've hoarded.

On a side note there is a guy in SoCal that might be selling his GV lip, but won't ship.

buffon01 08-07-2012 04:44 PM

Holy crap for $74 I might just bite O__O

shuiend 08-07-2012 07:05 PM


Originally Posted by buffon01 (Post 912559)
Holy crap for $74 I might just bite O__O

That is what I am thinking.

FowlerMotorsports 08-07-2012 07:54 PM

I caved and bought one, I was going to wait til friday but ---- it



Originally Posted by soviet (Post 912513)
time for a NB2 front end swap (I think all you need is bumper and headlights)

That's correct, my buddy has a NB2 swap and he replaced bumper and headlights

buffon01 08-07-2012 11:39 PM

Take pics when you get it!!! :bigtu:

UrbanFuturistic 08-08-2012 06:09 PM

I've been wanting a lip like a trap lip. But not for trap lip money. Anyone seen anything around? I've looked on eBay and google but haven't found much.

rleete 08-08-2012 06:26 PM

I bought on of the Touge Run ones from FM in the group buy. Looks identical to those above. It took a lot of abuse when my car was lower, and it's held up fine.

TorqueZombie 08-08-2012 07:59 PM

I will attest to that. My lip for my NA on my 97 took a road gator (blown semi tire) at 75 head on no issues. It pulled some of the screws out a bit from impact, but a screw driver fixed it seconds. Didn't even pull out far enough to touch pavement and the 97 is pretty low to me. Still can't tell where it hit a year later.

FowlerMotorsports 08-08-2012 11:13 PM

I'll get some pics of installation and fitment for anyone that is thinking of buying. According to fedex (which I hate dearly) it should arrive saturday. Good sunday project for me!


All times are GMT -4. The time now is 10:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands