blue89turbo

So I took the car to have it emissions tested today (Ontario)
And the car failed

I took a couple of pix of my test results and hopefully you guys can give me some tips to hopefully pass the test.

Here is a link to the results

Emissions test - a set on Flickr

Here is a run down of my set up too.

Greddy kit
1.6 inj
2.5 turbo tony Dp
DP6061 2.5 exhaust
2.5 High flow metal core cat.
K&N
VTA BOV
2.5 I/C piping
I/C
FM boost/vac gauge
AEM WB O2
Bipes
14 degree base timing
Older Guy O2 Clamp
5psi of boost showing on the gauge
Vac is ~25 @ idle

Bipes settings currently
pulling 12*
1* for each 50 F
start retard at 3000-4000

Thanks again for the help!

I really want to re-test tomorrow so that I can get a plate sticker and get here on the road for the summer
Running on a 10 day permit right now that expires on monday...

Braineack

iTrader: (62)

win, now google or search high NO and HC.


that combo pretty much says cat.

blue89turbo

win, now google or search high NO and HC.
that combo pretty much says cat.[/QUOTE]


Thanks,

Almost forgot

2.5 turbo tony Dp
DP6061 2.5 exhaust
2.5 High flow metal core cat.

edited and added to 1st post

the cat is brand new!

04 Miata

Was the car hot when it was tested so that the cat had fired off??

blue89turbo

Yes, I made sure that she was nice and hot before I had it tested.

RdSnake

Retard timing to 1*BTDc before going to the smog shop. Works every time for me.

blue89turbo

Thanks,

I am thinking of retarding from 14* to 10*
Also I may route the valve cover hose back to the intake now too.

blue89turbo

You guys think that I should mess with the Bipes or just retard the base timing to 10* ?

UrbanSoot

iTrader: (24)

dont mess with bipes. just retard your timing and you should be good.