Squeaking Chassis in parking lot
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Squeaking Chassis in parking lot
OK time for another stupid problem thread. When I drive very slowly around the parking lot and get on and off the gas, I hear loud creakCREAK coming from under the car. This happens regardless of if I'm messing with the clutch or not. It will creak each time the car changes pitch and the more rapidly it changes pitch e.g., stomping on the brakes or flooring it, the louder my car will creak.
Any ideas of what to check? For those who don't read signatures mine is a 2003 LS and the only stuff I've done to my suspension is kybs w/ fm springs and sways.
Any ideas of what to check? For those who don't read signatures mine is a 2003 LS and the only stuff I've done to my suspension is kybs w/ fm springs and sways.
#3
Elite Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Uh yah... I kinda didn't really grease up the bushings that well I think. I think I forgot to do it and then was like meh it'll be fineeee without it.
Any lube recommendations? :(
Any lube recommendations? :(
#10
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Damn, I wish people could pin down my chassis clunk this easily.
I agree with sway bushings too. Do you happen to get the dreaded sway popping from the sway linkage hitting on the upper control arm when you turn? I have that bad. Need to do the hose and clamp trick or find something similar to fix it with.
I agree with sway bushings too. Do you happen to get the dreaded sway popping from the sway linkage hitting on the upper control arm when you turn? I have that bad. Need to do the hose and clamp trick or find something similar to fix it with.
#11
Damn, I wish people could pin down my chassis clunk this easily.
I agree with sway bushings too. Do you happen to get the dreaded sway popping from the sway linkage hitting on the upper control arm when you turn? I have that bad. Need to do the hose and clamp trick or find something similar to fix it with.
I agree with sway bushings too. Do you happen to get the dreaded sway popping from the sway linkage hitting on the upper control arm when you turn? I have that bad. Need to do the hose and clamp trick or find something similar to fix it with.
__________________
#14
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Thread
Thread Starter
Forum
Replies
Last Post