Front coolant temp sensor thread pitch question
Searched over @ m.net and couldnt find it, google showed nothing either.
Anyone know what the thread pitch on the 1.6l front temp sensor is? Im looking to tap my front block off plate from begis coolant re route. |
Searching revealed this: https://www.miataturbo.net/forum/t17819/ which suggests that it's 16 x 1.5mm.
Unfortunately, it also revealed this: https://www.miataturbo.net/forum/t21405/ which says that a 14 x 1.5mm plug fits in the hole, but that it's "not exact." Probably one of those two, at any rate. |
Thanks Joe, always have an answer for these tedious questions!
|
Originally Posted by thesnowboarder
(Post 352339)
Thanks Joe, always have an answer for these tedious questions!
thanks... |
Its not 16x1.5 thats for sure. I ended up welding the sensor to the block off plate i have. I taped it first for 16x1.5 and it didn't thread in.
|
Thats strange because I used an M16x1.5 plug for mine. Maybe they switched sizes when between years.
|
has anyone drilled and tapped something and gotten the sensor to fit?
|
All times are GMT -4. The time now is 08:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands