ZX-Tex

iTrader: (15)

OK, I'll admit it, I did something stupid and need some help. I have two prosport gauges I am about to install. One is coolant temp, the other is vac/boost. They both use the same electrical connector on the back, same number of pins, same color wires. However the color code on the wires for the two connectors is in a different pin order. Problem is I mixed up the two harnesses, and am not sure which goes to which gauge. In other words they are not interchangeable based on wire order and I need to know which is which so I do not screw up the gauge when I power it on for the first time.

So, if you have a 52mm prosport gauge handy, either temp or vac/boost, can you tell me the color order of the wires on your connector? Does not matter which gauge, I only need to know one.

Here is the vac/boost gauge I have.
http://prosportgauges.com/Clear-lens...gauge-1-1.aspx

I tried calling prosport, no answer. I also RTFM and the wiring diagram does not show the wires in the same order as on either connector.

cardriverx

iTrader: (12)

my oil temp, looking at the back, from left to right, is : green, white, black, orange, red.

ZX-Tex

iTrader: (15)

Thanks cardriverx

This morning I received a e-mail message from Ryan at Prosport. I'll post it here in case anyone needs it later on.

"The boost harness from left to right is: Green, Black,Red, Orange, White. This is with the nubs on the plastic clip facing you and the wires hanging down."