Increasing boost, need a bigger wga..
Hey guys, I'm trying to up my boost using a mbc on the stock wga, but it's struggling to keep the wg closed around 12psi (it jumps to say, 12.5-13psi, then drops town to 12 and waves up and down while trying to bump it up to 15-18), any suggestions on a wg actuator solution that will bolt-on using the fm bracket? Something that can handle 20psi and keep that door closed.. :vash:
Other thing I was thinking of, was if the mbc might not be holding it closed, but I dunno... I've gotta drill+tap my IC for a hose for my wga, its running off the turbo right now (I know, I know, but I have silicone hoses) |
Pull the signal from the in between the IC and the TB and try again.
|
Are you sure the MBC is working correctly?
Have you tried tightening the arm on the wastegate? |
All times are GMT -4. The time now is 08:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands