madmalc

i have bought a gt2876r turbo to replace my t25 that came as part of the hks kit asi have been havin a few problems with it it has a t25 flange so i could just bolt is straight to my hks cast manifold which seems to be great but i fancy a bit more bling

could you post picture up of you turbo exhaust manifolds so i could get some ideas ideally want top mount but do like underslung turbos
ill even make one if i have too

pic, manufacturer and approx cost would be great


thanks lee

Braineack

iTrader: (62)

I so highly doubt a 2876 will fit on a hks manifold....well, it will fit, but not with the hood shut.

this will be your best example...top mounted 2876 :

http://gallery.y8s.com/miata/turbo/

M-Tuned

iTrader: (6)

I'd recommend this one!

You can purchase it at http://m-tuned.com/miata3.html

madmalc

r these turbos good the only reason i say this as it doesnt have 'garrett' on it
GT2876R TURBO CHARGER (spec copied just waiting for it to arrive)

Turbo spec :

compressor spec :

4" compressor inlet

inducer : 52.7mm

exducer : 76.0mm

trim :48

ar 0.70

Turbine spec :

wheel diameter :53.8mm

trim : 76

ar : 0.64

25 psi max

-t25 flange

y8s

iTrader: (8)

that isn't a Garrett GT2876R.

this is:

http://www.turbobygarrett.com/turbob...R_705330_2.htm

madmalc

thats what im sayin will it still be a good turbo even though it isnt from what i can see made my garrett

budget racer

iTrader: (1)

madmalc: please use punctuation, you're making my head hurt. thanks.

Braineack

iTrader: (62)

most likely yes, if the wheels are really the same.

elesjuan

iTrader: (11)

Offset top mount. We'll see how well it works, I haven't even test fitted it yet. Good ole' weld-els.

ArtieParty

iTrader: (1)

That's what I'm going to be running with a GT2560 as soon as Tim's done making it.

TurboTim

iTrader: (9)

heh...



That 2876 looks BIG!

y8s

iTrader: (8)

tim: you know you want one.

by the way, are you working on V8s now?

TurboTim

iTrader: (9)

I've always worked on V8's

m2cupcar

iTrader: (5)

SSA BP (mounted to an FE) - don't know if it's a ripoff or not, it's been around a long time. btw- Tim, can you copy a manifold with it in hand? more or less work than doing the work from ground zero?

TurboTim

iTrader: (9)

I'll reply via PM to keep my hijack count low.

M-Tuned

iTrader: (6)

That manifold was a knock-off of the Original ETD Racing Miata Long Tube Turbo Manifold. I believe Y8S might have the ETD version on his car.

Braineack

iTrader: (62)

yep y8s manifold posted above is the real ETD version.

m2cupcar

iTrader: (5)

so SSA can't take credit for the #4 ewg mount?

y8s

iTrader: (8)

I wonder if the SSA wg mount will actually let you mount a WG.



bare-ish manifold:

Braineack

iTrader: (62)

why dont you pick a bigger wasgate?