Eunos93

Ok I swapped a 1.8 into my 93 with all the info I could search for but there's just a few connectors of which I can't figure out where they go. Is there anyone in the Ct area near Hartford that can help me figure this out I would appreciate it. Can't wait to fire it up! Thanx!

Seefo

iTrader: (5)

you can take pictures and post them here...maybe someone can help that way.

Eunos93

Ok I got pics on my phone just don't know how to put them in a post. I may try on my computer when I get home!

Eunos93

ok it took me a while but ive managed to get some pics! let me know if you guys can help!

http://i1022.photobucket.com/albums/...2/IMAG0473.jpg
http://i1022.photobucket.com/albums/...2/IMAG0472.jpg
http://i1022.photobucket.com/albums/...2/IMAG0471.jpg

dustinb

pic #1
The first picture is your coolant temperature sensor. You were supposed to swap that entire thermostat assembly from your 1.6 and put it on the 1.8. It's a pain in the *** to do because you need to remove a metal cover that is behind the cam gears. Basically it's like you're doing a timing belt replacement.
Pic 2 and 3
That's a lot of connectors... I'm guessing all of those aren't connected to your motor but are from the chassis wiring. The one behind the motor is probably your CAS (you have to extend the wires to reach), and the other ones I'm not sure of.

DrewLGT

iTrader: (1)

pic 2 grey and orange on the big vac line is for your coils i think. to the right of that is for your CAS