turbopezz

so i removed the dual exhaust setup on my car and started running 3'' inch pipe.the problem is what muffler should i use a flowmaster or a can.i like the way russmans exhaust looks,with the cocked fartcan.but thats a NB.
DECISIONS???HUH
any picture would be apreciated..oh 3'' is necessary i have the pipind to the diff.and its definatly a big improvement.(im gonna run a straight through mufller)

Ike

Mines the center exhaust halfway down the page (3-inch all the way back). We used a Magnaflow and I really like the sound. It's very free flowing and, in my opinion, looks great.

http://www.bellengineering.net/Pages/intheshop.html

Braineack

iTrader: (62)

don't run a 3" and then run a baffled muffler....you want anything by Magnaflow or Borla let me know.

turbopezz

no i woulnt run a baffled muffler.right know i have a trust muffler thats 3 inch straight through .just hard to fit and its not very good lucking.(same shape as a flowmaster)and i wanted to stick it out the left side because i cut out the hole there already.

thanks brain im gonna check out there sites now.

m2cupcar

iTrader: (5)

just say NO to flowmaster (or anything built like it)

anything that's got a 13" can will fit in the space between the bumper support and the rear subframe- if by left you mean the exhaust/driver's side

Braineack

iTrader: (62)

What i'm planing on doing is running a 4" or 6" round muffler before the diff. Then just run a tip out the rear.

turbopezz

was thinking about this with that greddy muffler i have,but considering its so big i was thinking about a fart can at the ***.

i check out magnaflow and borla,and thought borla was over priced.

Kelly

iTrader: (6)

I would even pass on Borla. Magnaflow sounds great, lasts forever and flows well. I won't use anything else. Brain can get the deals on Magnaflow components.

Braineack

iTrader: (62)

for example:

http://www.magnaflowonline.com/catal...oducts_id=1857

Sorry I can't publish Magnaflow discounts. PM me.

miatamania

iTrader: (9)

so...would my 2.5" mandrel bent w/ a dynamax flow decent? Its just the "turbo crap" some dude had it on a greddy miata when I bought it...

or would a straight though like that be more of whats needed? Or is it not going to matter until I'm making a lot of powwa

Al Hounos

I got my 3" magnaflow from braineack. Kicks ***.

Braineack

iTrader: (62)

it's enough, dynomax mufflers are typically "turbo" mufflers. are you leave 1-5 ponies on the table? maybe.

miatamania

iTrader: (9)

Any sound clips of those...I love the sound of magnaflow but I don't know how those sound...

turbopezz

i can run the muffler that i have like the silver miata,but i dont car for the way it looks.
i like the way the black car with the sr swap looks.
i eally like the whit and red cars muffler setip and would like to do that out the drivers side.

turbopezz

the magna flow is definatly better priced,looks nicer and the ones i heard sounded good.

turbopezz

hey you think if i fitted my trust mufflerhear i would kill it ,id have to lower the muffler a lilttle to make it work.it sound perfect when i connect it so i wantt to try and use it.or should i run it like the silver miata,or should i just scrap it.

turbopezz

ok,my exhaust is on the car.just want to get a big chrome tip like this.
at idle the car is very quiet ,and at 3000 rpm and up is sounds awesome.turbo definatly spools quicker.

i will get pics as son as painted and get the crome piece.

any suggestion on where to get a big obnoxious cocked crome piece.i was thinking pepboys and buying the ones people put on there big trucks.

xvolcomx19

yeah the RSR is a nice exh,i love how it looks

krayzrac3r

just curious but does anyone know how many inches the rsr exhaust is? and how many mm's the tip is?

turbopezz

yea the rsr exhaust is bad *** looking.i think the tip is 4 or 4.5.there is a group buy on clubroadster for a remake but its not turbo friendly.and around $500 or more.im only in 25